Overview
The Rubicon Express RXT Monotube Shock Absorber, part number RXT2410B, has a 24.5-inch extended length, a 14.5-inch collapsed length and a 10-inch stroke. It has eyelet mounts at both ends and comes with a black urethane shock boot and all necessary mounting hardware.
The shock has a slim black body and runs as a replacement for the prior version of Rubicon Express twin tube shocks. Confirm whether you need a monotube or twin tube design before ordering.
Key features
- Slim black body
- 24.5-inch extended length
- 14.5-inch collapsed length
- 10-inch stroke
- Black urethane shock boot included
- All necessary mounting hardware included
Shock selection and wear signs
Shock length and stroke decide how much travel the shock can handle, so the new shock should match the suspension it replaces. A shock that is too short can bottom out, while one that is too long can strain the mounts. Ride height, bump stops and the spring rate all affect how the shock works, so consider them together.
A worn shock often shows up as bounce after bumps, nose dive under braking or a rough feel on the road. Look for oil residue on the body and cracks in the rubber boots. Replacing shocks in pairs on the same axle keeps the damping even from side to side.
- Match length and stroke to the suspension
- Look for oil residue on the shock body
- Check rubber boots for cracks
- Replace shocks in pairs on the same axle
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXT2410B |
| UPC | 614901453645 |
| Extended length | 24.5 inches |
| Collapsed length | 14.5 inches |
| Stroke | 10 inches |
| Mounts | Eyelet at both ends |
| Gas charge | Gas charged |
| Shock type | Monotube in the product name; twin tube in the spec table |
| Shock series | RXT Monotube |
| Shock boot | Black urethane |
| Fitment label | Direct Fit |
Vehicle fitment
The shock is sized by its lengths and is labeled Direct Fit. Measure your current shock’s extended and collapsed lengths before choosing it.
Compare the extended and collapsed lengths with the shock you are replacing, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock includes all necessary mounting hardware, so no separate mounts are described.
What’s included
One shock with a black urethane shock boot and all necessary mounting hardware.





