Overview
The Rubicon Express RE1810 is a front transfer case yoke that works with Rubicon Express CV style driveshafts. It suits 2- and 4-door models.
It is a direct fit.
Key features
- Front yoke
- Designed for Rubicon Express CV style driveshafts
- Direct fit.
Matching the yoke and driveshaft
The yoke is the connection between the transfer case output and the driveshaft. It carries torque and the sliding motion of the driveline, so its splines and seal surface need to be clean and undamaged. A worn or pitted yoke can damage the transfer case seal or make the driveshaft feel loose under load.
When a yoke is replaced, the driveshaft and joints usually come off too. Check the joint caps for wear, look for play in the driveshaft, and confirm the slip yoke moves smoothly. A CV style driveshaft works best when the angles at each end are set within what the vehicle allows, so measure the existing angles before installing new parts.
Replace the yoke nut and check its torque after the first drives, since the nut can loosen as new parts settle. Keep the transfer case fluid at the right level, and inspect the seal for leaks after driving. A worn seal often shows as a drip near the front output.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1810 |
| UPC | 614901438994 |
| Type | Transfer case yoke |
| Position | Front |
| Driveshaft compatibility | Rubicon Express CV style |
| Fitment type | Direct fit |
Vehicle fitment
Check the year and model against the yoke before ordering.














