Select your vehicle
-13%

Rubicon Express 18 Inch Rear Brake Line

Rubicon Express

  • 18-inch rear stainless steel brake line
  • Kevlar casing with Teflon inner hose
  • Fits lifted 4 to 6 inch applications
  • Built to DOT specifications

Purchase through Amazon

Orders are placed, shipped and supported through Amazon, with Amazon’s checkout, delivery options and return policy.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

Description

Overview

This Rubicon Express 18 inch rear brake line is a stainless steel rear line with an 18-inch length. It has a stainless steel outer casing, a rubber layer, and a kevlar casing around a Teflon inner hose.

It is intended for lifted applications between 4 and 6 inches. It is built to DOT specifications, and mounting brackets come with it where they are needed.

Key features

  • 18-inch rear line
  • Stainless steel outer casing
  • Kevlar casing and Teflon inner hose
  • Mounting brackets included where necessary
  • DOT built

Routing and clearance

A rear brake line has to handle suspension articulation as well as brake pressure. As the axle moves up and down, the line stretches and flexes, so its length and routing decide whether it stays clear of the frame, springs and tires. Lifted vehicles change those angles, which is why the line length is worth checking against the suspension travel of the rig. Stainless steel casing resists abrasion from rocks and debris better than rubber does.

Brake lines are often replaced together with the flex hoses and brackets around them, since worn rubber at the ends can fail even when the steel run is sound. After installation, bleed the brakes and check the pedal feel. Look for chafing, kinks and rubbing points after the first few drives, and re-route or add protection where the line touches anything.

  • Check the line at each bracket for chafing after off-road trips
  • Replace worn flex hoses at the same time as the steel line
  • Confirm full steering and suspension travel does not stretch the line

Specifications

Brand Rubicon Express
Part number Not listed
UPC 614901451238
Length 18 inches
Position Rear
Lift range 4 to 6 inches
Material Stainless steel

Vehicle fitment

Compare the 18-inch length with your rear brake line and suspension travel before choosing it. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Check for clearance at the tires and moving suspension components, and make sure the length allows full travel. Bleed the system once the line is in.

What’s included

One 18-inch rear brake line and any brackets needed for mounting.

SKU: R/ERE15151 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 9.00 × 6.00 × 3.00 in
brands

Questions & Answers

Does the 18-inch rear line fit my Jeep?

This line is intended for lifted applications between 4 and 6 inches. Confirm fit for your vehicle's year, model and trim before ordering, then compare the 18-inch length with your rear brake line and suspension travel.

What is the inner hose?

The inner hose is Teflon. It sits inside a kevlar casing, and the outer casing is stainless steel. The line is intended for lifted applications from 4 to 6 inches.

Does it meet DOT rules?

Yes, it is built to DOT specifications. Mounting brackets are included where they are needed for installation, so check that the brackets suit your mounting points before fitting the line.

Is a stainless steel line better than a rubber hose for lifted rigs?

Yes, the stainless steel outer casing resists abrasion and rock strikes better than rubber, which matters on lifted rigs with more exposure. Length and routing still have to be right, since the line must flex with suspension travel without stretching or rubbing.