Overview
The Rubicon Express RE1603 is a rear track bar bracket for the Jeep Wrangler TJ, covering the 1997-2006 model years. It mounts on the axle side for lifts from 3 to 4.5 inches.
The bracket supports proper rear axle alignment on a lifted TJ. It is for vehicles without a CV driveshaft.
Key features
- Rear track bar bracket for the TJ
- Built for 3 to 4.5 inch lifts
- Helps with proper rear axle alignment
- Axle side mount
Rear alignment on lifted TJs
A rear track bar keeps the rear axle centered as the suspension moves. On a lifted TJ, the axle-side mount sets the track bar angle, and that angle affects how the axle sits under the vehicle. Correct geometry helps the rear end track straight and reduces side-to-side movement.
Vehicles without a CV driveshaft use this bracket, so the driveline is part of the planning. Check the driveshaft type before ordering, and keep in mind that changes to ride height can affect driveline angles as well. Inspect the axle-side bolts and the track bar bushings during each service.
After installation, measure and set the track bar length, then re-check the bolts after the first drives. Keep the rear axle centered and the track bar free of binding so the parts wear evenly over time.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1603 |
| UPC | 614901438703 |
| Position | Rear, axle side |
| Lift compatibility | 3 to 4.5 inches |
| Driveshaft | Without CV driveshaft |
Vehicle fitment
The TJ Wrangler, covering the 1997-2006 model years, is the fitment for this bracket.
This bracket is for the TJ Wrangler, so check your model and year before ordering.









