Overview
The Rubicon Express 3.5 inch standard coil lift kit, part number RE7002, is a no shocks lift kit for the Jeep Wrangler TJ or LJ. It provides 3.5 inches of lift as an entry-level option.
The kit includes front and rear replacement coil springs, bump stops, extended sway bar end links and a rear track bar bracket. The stock control arms, track bar and other components are kept, which Rubicon Express describes as an entry-level option for owners on a smaller budget.
The kit can be upgraded to the 3.5 inch or 4.5 inch Super-Flex System. It is covered by an Advantage lifetime warranty.
Key features
- Front and rear replacement coil springs
- Bump stops included
- Extended sway bar end links
- Rear track bar bracket
- Stock control arms, track bar and other components retained
- Upgradeable to the 3.5 or 4.5 inch Super-Flex System
Shocks and alignment after a lift
A coil lift raises the body relative to the axles, which changes shock extension and compression. Because this kit ships without shocks, measure your current units against the new ride height before installing the springs. Shocks that are too short can bottom out, while overly long ones can cause the suspension to top out and loosen mounts.
Lifting a Wrangler also shifts the geometry of the control arms and track bar, so have the alignment checked after installation. Driveline angles should be inspected at the same time, since a higher ride height can increase u-joint angles and cause vibration. Re-torque the bolts after the first few drives on the new lift.
- Check shock length against the new ride height
- Inspect the track bar bushings after installation
- Recheck driveline angles and alignment
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7002 |
| UPC | 614901441611 |
| Kit type | Standard 3.5 inch coil lift |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Rear lift method | Coil springs |
| Shocks included | No |
| Warranty | Advantage lifetime warranty |
Vehicle fitment
It fits the Jeep Wrangler TJ (1997–2006) and the Jeep Wrangler LJ (2004–2006). The lift range is 3 to 4.99 inches.
Other Wrangler generations are not covered by this kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Shocks are not included, so check your current shocks against the lift before installing. A lift changes alignment, so have the vehicle aligned after installation and check driveline angles.
What’s included
Front and rear coil springs, bump stops, extended sway bar end links and a rear track bar bracket.
Not included: shock absorbers.






