Overview
The Rubicon Express RE9995 heavy duty control arm brackets are weld-on front lower control arm mounts for Jeep TJ, XJ and ZJ models. They are sold as a pair and mount on the axle side. Rubicon Express describes them as a direct replacement for the stock brackets, which are thin sheet metal tabs on the front axle.
The brackets are laser cut from steel plate and ship raw, ready to weld. They come pre-packed with heavy alignment washers, so caster can be changed during installation. They are compatible with cam bolts sold separately.
Key features
- Heavy duty lower control arm brackets, sold as a pair
- Mounts on the axle side
- Laser cut from steel plate, shipped raw for welding
- Pre-packed heavy alignment washers for caster adjustment
- Compatible with cam bolts, sold separately
Caster and weld-on mounts
Front lower mounts set the position of the control arm at the axle, which directly controls caster. Changing caster can improve steering return and reduce wander at speed, but it also changes the forces on the arm and the bushing, so the setting should be chosen with the lift and tire size in mind.
Weld-on mounts need clean steel and careful fit. Remove paint and rust from the contact areas, position the bracket, and check the arm angle before final welds. After welding, inspect the weld beads, and recheck caster and alignment once the vehicle is on the ground.
- Clean the mounting surfaces to bare metal
- Confirm caster with the vehicle at ride height
- Inspect welds after the first trail use
- Re-check alignment after any caster change
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9995 |
| UPC | 614901093148 |
| Position | Front lower |
| Mounting location | Axle side |
| Finish | Raw steel |
| Quantity | Pair |
| Installation | Weld-on only |
Vehicle fitment
They fit the Jeep TJ, XJ and ZJ as front lower control arm mounts. That covers the 1997-2006 Wrangler TJ, the 1984-2001 Cherokee XJ and the 1993-1998 Grand Cherokee ZJ.
Before ordering, confirm the year, model and trim of your vehicle, along with the mounting position.
Installation notes
These brackets are weld-on only. Weld them to the axle with the arm positioned, and use the alignment washers to set caster before final welding. Cam bolts are sold separately if you want adjustable caster through the bolt.
What’s included
A pair of heavy duty front lower control arm brackets, shipped raw, with pre-packed alignment washers.
Not included: cam bolts and the control arms.


