Select your vehicle
-13%

Rubicon Express 1.75 Inch Coil Spring Spacers Lift Kit – RE1326

Rubicon Express

Shop Rubicon Express Coil Spring Spacers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express 1.75-inch coil spring spacer, part number RE1326
  • Rear position, sold as a pair
  • Fits 2 and 4-door models
  • UPC 614901437768

Description

Overview

The Rubicon Express 1.75 Inch Coil Spring Spacers Lift Kit, part number RE1326, is a pair of rear coil spring spacers that raise the rear by 1.75 inches. It fits 2-door and 4-door models.

The spacers add lift to the existing coil springs without compromising coil performance. They also help balance extra rear weight.

Key features

  • 1.75-inch rear lift
  • Sold as a pair
  • Fits 2-door and 4-door models
  • Spacers do not compromise coil performance

Rear lift and shock travel

Rear coil spacers raise the axle by moving the spring seat up, so the coil keeps its rating while the rear sits higher. This helps level a vehicle that carries extra rear weight, such as a loaded rack or a trailer hitch setup. The change also moves the axle, so the driveshaft angle shifts and should be looked at once the lift is done.

When choosing a rear spacer, think about the parts that are often replaced alongside it. Rear shocks may need a longer or shorter length, and brake lines can be stretched by the new height. Bump stops and the rear sway bar links may also need checking. Inspect the spacer seats for cracks during routine service, since a loose or worn seat can let the spring shift.

  • Check driveshaft angle after installation
  • Look at rear brake line length
  • Inspect bump stops for clearance

Specifications

Brand Rubicon Express
Part number RE1326
UPC 614901437768
Lift height 1.75 inches
Position Rear
Fitment Direct fit
Sold as Pair

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. The spacers suit 2-door and 4-door models in the rear position.

Confirm your vehicle’s year, model and trim before ordering, and check that the rear coil springs match the spacer design.

Installation notes

The rear spacers sit between the coil spring and its seat, so support the rear axle safely while the springs are changed. Check the rear brake lines and shocks after the lift.

What’s included

A pair of rear coil spring spacers.

SKU: R/ERE1326 Category:

Specification

Shipping weight 3.80 lbs
Package dimensions 10.00 × 6.40 × 6.10 in
brands

Questions & Answers

Does the RE1326 spacer fit a 4-door Jeep?

It fits 2-door and 4-door models. Confirm your vehicle's year, model and trim before ordering, since the fit depends on the rear coil springs and their seats.

What lift does the RE1326 give at the rear?

It raises the rear by 1.75 inches. The spacers come as a pair, so both rear coil springs are lifted by the same amount, keeping the rear level side to side.

Does the RE1326 need new shocks?

Shock length should be checked against the new rear height after installing the pair, because the spacers change the travel the shocks see. Replacement shocks are a separate choice, and the need depends on your setup.

How often should spacer seats be inspected?

Check them at each service and after rough trail use, looking for cracks, rust or movement. A loose seat can let the spring shift, so tighten or replace the hardware as needed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rubicon Express Coil Spring Spacers on Amazon