Overview
The Rubicon Express RE4541 is a 3-link rear suspension upgrade for the 2007 to 2018 Jeep Wrangler JK. It is built around a heavy duty CNC laser cut axle truss, an adjustable chromoly center link, a differential support ring and high quality hardware. Rubicon Express designed it as a bolt-on for Dana 44 housings.
The 3-link geometry is designed to improve traction and reduce rear steer and bushing bind. It is an upgrade for vehicles equipped with the 3.5 and 4.5 Rubicon Express Extreme Duty Long Arm Suspension.
The components are made in the USA, and Rubicon Express backs them with its Advantage lifetime warranty.
Key features
- CNC laser cut axle truss
- Adjustable chromoly center link
- Differential support ring
- High quality hardware included
- Bolt-on design for Dana 44 housings
- Compatible with Extreme Duty Long Arm systems
- Made in the USA
Pinion angle and center link setting
A 3-link system controls axle position with three links instead of leaf springs, so the center link sets how the axle sits under acceleration and braking. Because the center link is adjustable, changing its length changes pinion angle and how the drivetrain works under load. Set it with the vehicle at its normal ride height and check the pinion angle after any change.
Bushing bind is less of an issue with a 3-link, but the links still wear at the joints. Inspect the axle truss and differential support ring after rough trail use, and look for cracks where the welds meet the housing. Replace worn links in matched sets so the axle stays square.
- Check pinion angle after center link changes
- Inspect joints for play or wear
- Look at weld seams on the truss after hard use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4541 |
| UPC | 614901453324 |
| Application | Jeep Wrangler JK rear suspension |
| Axle housing | Dana 44 |
| Center link | Adjustable chromoly |
| Installation | Bolt-on |
| Made in | USA |
Vehicle fitment
It is for the Jeep Wrangler JK rear suspension in the 2007 to 2018 range.
It is made for the Jeep Wrangler JK. Make sure the year, model and trim match your vehicle before ordering.
Installation notes
Installation is bolt-on, and the center link is adjustable. Set it with the vehicle at its intended ride height, then recheck after the first drive and check alignment after the rear geometry changes.
What’s included
The CNC laser cut axle truss, adjustable chromoly center link, differential support ring and the hardware for the bolt-on install.





