Overview
The Rubicon Express Extreme-Duty Crossmember, part number RE4200, is a long arm conversion pan for the 2003-2006 Jeep Wrangler TJ. It is the frame mount for the long arm control arms, the transmission and the transfer case in Rubicon Express’s RE7200 long arm lift kits.
The pan strengthens the frame where the suspension mounts and includes a drop-out center section. The section comes out so the transfer case and transmission can be serviced without removing the suspension components. The pan adds nearly an inch of ground clearance.
Mounting this pan may require modifying the exhaust hanger bracket on some vehicles, so check the exhaust before you start.
Key features
- Long arm conversion pan for the TJ Wrangler
- Mounting point for all of the long arm control arms
- Drop-out center section for transfer case and transmission service
- Brackets designed to strengthen the frame
- Does not require welding
Preparing for installation
Frame-mounted parts carry load through the mounting points, so look over the frame rails and existing crossmember area before fitting anything. Surface rust, bent sections and cracks near the bolt holes should be dealt with first. Clean the contact faces so the pan seats flat and bolts clamp evenly.
Plan the exhaust work before the crossmember goes in. The hanger bracket may need reshaping on some vehicles, so remove the exhaust hangers early and check the pipe clearance while the parts are loose. Keep the transmission and transfer case supported while the old crossmember comes out.
- Inspect frame mounts before bolting in the pan
- Mark exhaust clearance before final tightening
- Support the drivetrain during removal
- Recheck fasteners after the first trail outings
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4200 |
| UPC | 614901441260 |
| Product type | Crossmember, long arm conversion pan |
| Finish | Black powder coat |
| Welding | Not required |
| Ground clearance gain | Nearly 1 inch |
| Fitment type | Direct fit |
| Series | RE7200 long arm lift kits |
Vehicle fitment
The conversion pan is for the 2003 to 2006 Jeep Wrangler TJ.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Expect to modify the exhaust hanger bracket on some vehicles. The pan installs without welding.
What’s included
One crossmember pan in black powder coat.
Not included: This is part 1 of 2 in the set. Confirm the second piece’s part number before ordering.











