Select your vehicle
-13%

Rubicon Express Super-Flex Assembly – RE3791

Rubicon Express

Shop Jeep Cherokee XJ Flex Joints on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Weld-on Super-Flex joint cartridge for upper control arm mounts
  • Fits the XJ, MJ, ZJ, TJ and WJ Jeep chassis
  • UHMW side races and a threaded adjuster nut for tightening and rebuilding
  • Serviceable, with a rebuildable joint
  • Part number RE3791, UPC 614901440928

Description

Overview

The Rubicon Express RE3791 Super-Flex assembly is a small weld-on joint cartridge for the factory front or rear upper control arm mounts on Jeep XJ, MJ, ZJ, TJ and WJ chassis. Rubicon originally designed the Super-Flex cartridge to replace the heim joints used in its early suspension designs.

Super-Flex joints were built for race use, where factory rubber bushings wear out quickly and need frequent replacement. The joints are designed to stay tight through repeated hard use.

Key features

  • Small cartridge sized for the factory upper control arm mounting points
  • UHMW side races
  • Threaded adjuster nut for easy tightening and rebuilding
  • Weld-on joint kit
  • Serviceable, with the joint rebuilt as needed

Joint wear and alignment

A control arm joint carries steering and suspension loads at the frame end of the arm, so play in the joint shows up as clunks, wander or uneven tire wear. Before installing a new joint, check the mount points and the control arm for cracks, and make sure the factory arm is straight and sound. Once the joint is welded in, the suspension needs a full alignment, since changing the joint position shifts caster and toe.

Inspect the joint by hand with the suspension supported, and look for movement or binding. The threaded adjuster nut lets you snug the joint as it wears, but overtightening can make steering stiff, so adjust in small steps. Keep the joint clean of mud and grit, and recheck the adjustment after rough trail use.

Specifications

Brand Rubicon Express
Part number RE3791
UPC 614901440928
Joint details Weld-on joint kit
Maintenance Serviceable
Thread direction N/A
Type DOM
Mounting points Front or rear upper control arm mounts
Chassis XJ, MJ, ZJ, TJ and WJ

Vehicle fitment

Covers the XJ, MJ, ZJ, TJ and WJ chassis: Jeep Cherokee (XJ) 1984 to 2001, Comanche (MJ) 1986 to 1992, Grand Cherokee (ZJ) 1993 to 1998, Wrangler (TJ) 1997 to 2006, and Grand Cherokee (WJ) 1999 to 2004.

It does not cover the Wrangler (JK), Grand Cherokee (WK) or Liberty (KJ) chassis. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit is a weld-on joint, so fitting it means welding it in place. Have the work done by someone experienced with control arm fabrication.

What’s included

The Super-Flex cartridge with its threaded adjuster nut, as a weld-on joint kit.

Not included: The factory control arms, which the joint fits into.

SKU: R/ERE3791 Category:

Specification

Shipping weight 2.00 lbs
Package dimensions 6.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ) likely fits1984–2001All
Jeep Comanche likely fits1986–1992All
Jeep Grand Cherokee (WJ) likely fits1999–2004All
Jeep Grand Cherokee (ZJ) likely fits1993–1998All
Jeep Wrangler (TJ) likely fits1997–2006All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RE3791 fit a 2000 Jeep Cherokee?

Yes. The XJ chassis covers the Jeep Cherokee from 1984 to 2001, so a 2000 model is included. The joint fits the factory front or rear upper control arm mounts on that chassis.

Is the Super-Flex joint serviceable?

Yes. The joint is serviceable and can be rebuilt as needed. The threaded adjuster nut allows tightening and rebuilding, which is a practical advantage over factory rubber bushings that need replacing.

Does this kit need welding?

Yes. The joint is a weld-on kit, so it is installed by welding it into the control arm mount. The work should be done by someone experienced with control arm fabrication.

How can I tell when a control arm joint needs rebuilding?

Look for play or clunking at the joint, uneven tire wear or steering that feels loose. Check the joint by hand with the suspension supported. If it moves or binds, rebuild or replace it and recheck alignment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Cherokee XJ Flex Joints on Amazon