Overview
The Rubicon Express Extreme-Duty front leaf spring, part number RE1450, is a single spring for a 4.5-inch front lift, with a listed width of 2.5.
The spring is built for articulation, a smooth ride, extra load capacity and durability. It is designed to handle the added torque from larger tires and lower gears.
The spring has military wrap spring eyes, diamond cut leaves, bolt-on spring clamps, antifriction sliders and top grade US steel.
Key features
- Military wrap spring eyes
- Diamond cut leaves
- Bolt-on spring clamps
- Antifriction sliders
- Top grade US steel
- Extreme-duty construction for larger tires and lower gears
Choosing and installing leaf springs
A leaf spring carries the weight of the axle and controls how it moves over uneven ground. Its leaves flex, and the wrap eyes and sliders let the spring change length as it compresses and extends. Because the spring holds the axle in position, its mounting hardware matters as much as the spring itself.
When a spring goes in, the shackles, bushings and spring plates should be checked as a set. Worn eye bushings allow the axle to shift, and tired shackles can change the ride height. Replacing these parts together helps the new spring sit and flex as designed.
Inspect the spring after installation and again after the first trail trips. Look for cracked leaves, a sagging arch, loose clamps and worn sliders. Retorque the U-bolts and clamp fasteners once the vehicle has settled.
- Replace worn eye bushings and shackles together
- Check driveline angles after a lift
- Inspect the sliders and leaf clamps for wear
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1450 |
| UPC | 614901438284 |
| Position | Front |
| Lift | 4.5 inch |
| Lift height range | 0 to 4.99 inches |
| Spring quantity | Single spring |
| Spring width | 2.5 |
| Bushings | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the spring against your axle and mounting points before installing.
Installation notes
The spring requires RE2785 conversion shackles and RE2050 spring plates. Because it provides a 4.5-inch lift, have the alignment checked and the driveline angles reviewed after installing.
The spring needs RE2785 conversion shackles and RE2050 spring plates, so plan the install around those parts before ordering.
What’s included
One front leaf spring.
Not included: bushings, the RE2785 conversion shackles and the RE2050 spring plates.



