Overview
The Rubicon Express 20 inch front brake line set replaces the stock rubber front brake lines with stainless steel braided lines. Each line is 20 inches long, and the set is sold as a pair.
The braided lines are protected by a vinyl cover and use a Teflon inner hose. They are designed for lifted applications from 4 to 6 inches and are built to DOT requirements.
Key features
- 20-inch length
- Braided stainless steel
- Vinyl protective cover
- Teflon inner hose
- Sold as a pair
- Meets DOT requirements
Braided lines and heat
Braided stainless lines flex less under pressure than rubber hoses, but they still need periodic inspection. Front lines usually run close to the steering components, the wheel well and the exhaust side of the vehicle, so heat and debris can work on the vinyl cover over time. Look for splits in the cover, flattened sections where the line bends, and scuffing where it touches a bracket or suspension arm. A worn cover can hide damage to the braid underneath, so replace the line when the cover is compromised.
Front lines are often replaced together with the pads, rotors and caliper hardware during a brake service. Because both front lines carry the same pressure, check them as a pair. Bleed the front circuit after installation and recheck clearance once the suspension has settled.
- Look for splits in the vinyl cover
- Check where the line bends near the caliper
- Keep clear of steering and suspension arms
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901451290 |
| Length | 20 inches |
| Position | Front |
| Lift range | 4 to 6 inches |
| Material | Stainless steel |
| Sold as | A pair |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Choose the 20-inch length only after checking it against your suspension travel and lift height.
Installation notes
Bleed the brake system after the lines are fitted, and confirm that the lines clear the tires and suspension at full travel.
What’s included
A pair of 20-inch front brake lines and any brackets needed.







