Overview
The Rubicon Express JK 1.5″ Leveling Kit, part number JK1301, raises the front of a Jeep Wrangler JK by 1.5 inches so the front sits level with the rear. It is built for 2- and 4-door JK Wranglers from 2007 through 2018 and suits owners who want a level stance and room for 33-inch tires without a full suspension lift.
Many Jeeps sit with the front lower than the rear, a condition called factory rake. This kit levels that rake with polyurethane coil spring spacers at the front and rear, and it adds new sway bar end links to match the higher ride height. It is an economy option for owners who want extra clearance for on and off-road use, and the kit keeps the factory ride.
Leveling is a common first step for a JK that will run larger tires. The spacers do not replace the shocks, so the kit is a stance and clearance change rather than a complete suspension rebuild.
Key features
- 1.5-inch front lift that levels the factory rake
- Front and rear polyurethane coil spring spacers
- New sway bar end links included
- Rated for tires up to 33 inches (33×12.50 maximum)
- Bolt-on installation for 2- and 4-door JK Wranglers
- Covered by the Rubicon Express Advantage Lifetime Warranty
Choosing a leveling setup
A leveling kit changes the angle of the front suspension, so the shocks, bump stops and steering geometry all see a new position. Shocks that were matched to the old ride height may run near the end of their travel, so inspect them before installing the kit. Leveling works best when the front and rear heights are close to each other, since a level stance also helps tires wear evenly.
After installation, the front alignment should be checked and the steering components inspected for wear. Ball joints, tie rod ends and the track bar all work at a changed angle, and looseness there is easier to catch early. Sway bar end links are included, so compare the old links against the new ones before discarding anything.
- Inspect shocks for wear before installing
- Get the front alignment checked afterward
- Check tie rod ends and ball joints for play
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK1301 |
| UPC | 614901242843 |
| Front lift height | 1.5 inches |
| Lift method | Coil spring spacers, front and rear |
| Spacer material | Polyurethane |
| Finish color | Black |
| Maximum tire size | 33×12.50 (33-inch tires) |
| Fitment | Direct fit |
| Bump stops | None |
| Shock relocation bracket | Not applicable |
| Track bar drop | Not included |
| Shock absorbers | Not included |
Vehicle fitment
This kit is for the 2007-2018 Jeep Wrangler JK, 2- and 4-door models. The kit covers tires up to 33×12.50, so a 33-inch tire is the largest size it is rated for.
The 2018-2022 Wrangler JL and the 2020-2022 Gladiator JT are later platforms and are not covered by this JK kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on. Because a leveling kit changes front ride height and suspension geometry, have the front alignment checked after installation. Shock absorbers are not included, so confirm that your current shocks suit the higher ride height.
What’s included
Front and rear polyurethane coil spring spacers and a set of new sway bar end links.
Not included: Shock absorbers.






