Overview
The Rubicon Express RE1175 is a pair of extended front sway bar end links designed for 2 inches or more of lift. The chassis codes match the Jeep Cherokee XJ from 1984 to 2001, the Jeep Grand Cherokee ZJ from 1993 to 1998 and the Jeep Wrangler TJ from 1997 to 2006.
The links are non-disconnect style for vehicles that are driven mostly on the road, and they can be removed for improved off-road flex. They require part number RE1171 or RE1172 for proper mounting, so order the adapter brackets with them.
Key features
- Extended front sway bar end links
- For 2 inches or more of lift
- Non-disconnect style
- Non-adjustable length
- Sold as a pair
- Requires RE1171 or RE1172 for proper mounting
Lift height and link length
Front end links set the sway bar angle, and that angle changes as lift height goes up. A link designed for 2 inches or more of lift keeps the bar closer to its intended position than a stock link would at that height. Because the length is fixed, the lift you run must fall within the range the link was made for.
When a bar’s geometry changes, the bushings and mounting points carry more load. Inspect the bushings and the bar ends for cracking and play after the first few drives, and re-check the bar position if the suspension is adjusted again. Keep a set of spare bushings on hand for trail repairs.
- Match the link to your current lift height
- Check the adapter brackets before you start the install
- Re-check the bar angle after any suspension adjustment
- Inspect bushings and bar ends at each service
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1175 |
| UPC | 614901437416 |
| Position | Front |
| Lift | 2 inches or more |
| Sold as | Pair |
| Style | Non-disconnect, non-adjustable |
| Required mounting parts | RE1171 or RE1172 |
Vehicle fitment
The front XJ, ZJ and TJ applications map to the 1984-2001 Jeep Cherokee (XJ), the 1993-1998 Jeep Grand Cherokee (ZJ) and the 1997-2006 Jeep Wrangler (TJ).
Confirm the year, model and trim against each range above before ordering.
Installation notes
The links need the RE1171 or RE1172 adapter bracket for proper mounting, so order the bracket with the link. Check the sway bar angle and the link clearance after the install, and confirm the links clear the frame at full travel.
What’s included
One pair of extended front sway bar end links. Not included: the RE1171 or RE1172 adapter bracket, which is required for proper mounting.





