Overview
The Rubicon Express RE7002M is a 3.5-inch standard coil lift kit with mono tube shocks, made for the Jeep TJ or LJ Wrangler. It gives 3.5 inches of lift at a lower cost than the Super-Flex systems in the line. The stock control arms, track bar and other components stay in place.
It fits the Jeep TJ, which covers 1997-2006 Wranglers, and the LJ, which covers 2004-2006 Unlimited models. The kit includes new coil springs, bump stops and extended sway bar end links, plus a rear track bar bracket. It can later be upgraded to either a 3.5-inch or 4.5-inch Super-Flex system.
Key features
- 3.5-inch lift height, in the 3 to 4.99-inch range on the chart
- Front and rear replacement coil springs
- Bump stops
- Extended sway bar end links
- Rear track bar bracket
- Mono tube shocks included.
- Upgradeable to a 3.5- or 4.5-inch Super-Flex system
Before you install a coil lift
A coil spring lift raises the body by changing spring height, while the axles and control arms stay largely in their factory positions. That makes it a practical way to gain tire clearance without a full long arm system. The change still affects ride height, steering geometry and how the suspension travels, so review the rest of the vehicle before the job starts.
Shocks and bushings are often worth inspecting at the same time, because worn parts can make the new height settle unevenly. Look over bump stops, sway bar links and brake lines once the vehicle is raised, and check for stretched or cracked rubber. An alignment after the springs have settled helps the tires wear evenly. Plan for a longer day if the shocks are replaced too, since the lower mounts often need extra attention.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7002M |
| UPC | 614901452723 |
| Kit type | Standard coil lift |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Suspension type | Short arm |
| Coil springs | Front and rear replacement |
| Shocks | Mono tube, included |
Vehicle fitment
It covers the 1997-2006 Jeep Wrangler (TJ) and the 2004-2006 Jeep Wrangler (LJ).
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The stock control arms and track bar stay in place, so the new coil springs and sway bar links are the main changes at each corner. A TJ or LJ lift changes ride height and alignment, so an alignment should be checked afterward.
What’s included
The kit includes front and rear replacement coil springs, bump stops, extended sway bar end links and a rear track bar bracket. Mono tube shocks are part of this version.






