Overview
The Rubicon Express RE3721 is a set of front lower fixed control arms for the Jeep Wrangler JL, 2018 to 2026, in both 2-door and 4-door models. The arms replace the factory control arms in the front lower position.
The arms add strength, articulation and caster. They are longer than the OE arm to hold proper caster on a lifted vehicle, and they use PT MEG bushings for durability and articulation.
Key features
- Front lower fixed control arms
- 1.75-inch diameter, thin wall 4130 chromoly tube
- PT MEG bushings for durability and articulation
- Length increased over the OE arm to keep proper caster when lifted
- OE brake line bracket mount built into the arm design
Caster and lift height
Caster is the forward tilt of the steering axis, and it is what keeps the front wheels tracking straight and returning to center. When a Jeep is lifted, the factory arm length can pull caster down, which makes steering feel loose and wander at speed. Longer front lower arms are one way to restore caster, but the change also shifts the axle and affects steering geometry, so the setup should be checked as a whole.
Front control arm bushings and ball joints take more load once the arms are changed. Inspect the bushings for cracking and the joints for play after the first few trail trips. Check the steering linkage, tie rod ends and brake lines for clearance once the arms are in place, because a longer arm can move parts that were set for stock. Retorque the fasteners after the first drives and recheck caster after any further lift changes.
- Recheck caster after installation
- Inspect bushings and joints after early trail use
- Confirm brake line clearance at full travel
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3721 |
| UPC | 614901280050 |
| Position | Front lower |
| Length | Fixed, longer than OE |
| Tube | 1.75 in diameter, thin wall |
| Material | 4130 chromoly |
| Bushings | PT MEG |
| Body style | 2-door and 4-door |
Vehicle fitment
It fits the Jeep Wrangler JL from 2018 onward, in 2-door and 4-door models. That covers the 2018-2026 model years.
It is for the front lower position only. Make sure year, model and trim match your vehicle before ordering.
Installation notes
The arms are longer than the OE part to hold caster on a lifted Wrangler, so check the caster after installation. The brake line bracket is built into the arm and does not need a separate mount.
What’s included
Front lower fixed control arms with PT MEG bushings and integrated brake line bracket mount.









