Overview
The Poison Spyder JK lower A-pillar light mounts (part number 45-28-RDA) give a way to mount a pair of off-road lights on the lower A-pillar area of the Jeep JK. They are designed for the Rigid Industries Dually or Dually D2 LED lights, and other compact off-road lights with a 7/16 inch hole may also fit.
The brackets are CNC laser cut and brake formed from steel, and powder coated semi-gloss black. They are sold in pairs and include rubber liners to protect the Jeep’s paint. They mount on a windshield hinge and are made for the Jeep JK.
Key features
- Pair of brackets for two off-road lights
- Designed for the lower A-pillar area of the Jeep JK
- Designed for Rigid Industries Dually or Dually D2 LED lights
- Light mounting hole is 7/16 inch
- CNC laser cut and brake formed steel
- Black powder coat, rubber liners included
Windshield hinge mounting basics
A windshield hinge mount carries the weight of the lights on the hinge bolts, so the hardware and the hinge itself take the load. Check the hinge for cracks or play before adding any weight. Lights mounted here also move with the windshield when it is opened, so confirm that the wiring and the lights clear the frame through the full swing.
Wiper clearance is a common issue. Lights that sit in the wiper sweep can scratch the glass or stop the wipers from parking correctly. Route the wiring along the frame and keep it away from the defroster vents and the washer lines.
Check the fit with the windshield open and closed before tightening everything fully. Recheck the hardware after rough trail use, and look at the rubber liners for wear.
- Inspect the hinge for cracks or play
- Confirm wiper clearance with the lights mounted
- Check the windshield swing before final tightening
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-28-RDA |
| UPC | 614901728712 |
| Type | Light mounting bracket set |
| Material | Steel |
| Finish | Black powder coated, semi-gloss |
| Light mounting hole | 7/16 inch |
| Mounting type | Windshield hinge |
| Quantity | Pair |
Vehicle fitment
The brackets are made for the Jeep JK, which covers the 2007 to 2018 Wrangler model years. They mount on a windshield hinge and are a universal fit part, so confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets mount to the lower A-pillar area on the windshield hinge. The rubber liners go between the bracket and the paint so the finish is protected during fitting.
What’s included
A pair of steel light mount brackets with rubber liners.
Not included: the off-road lights, which are sold separately.
