Overview
The Poison Spyder RockBrawler Hi-Lift Jack Mount, part number 45-61-010, is a bare steel plate that holds a Hi-Lift jack on the Poison Spyder RockBrawler Rear Bumper with Tire Carrier.
The plate is CNC laser cut from 3/16″ plate steel with a Spyder web pattern. It bolts to the top of the tire carrier with the supplied Grade 8 hardware, and the jack attaches to the plate with a pair of heavy duty 1/2″ carriage bolts fitted with urethane isolator bushings. Because the plate arrives as bare steel, it can be painted or powder coated in any color.
Key features
- Bare steel finish, ready for paint or powder coat in a color of your choice
- CNC laser cut from 3/16″ plate steel
- Spyder web design in the plate
- Bolts to the top of the tire carrier with Grade 8 hardware
- Jack attaches with two heavy duty 1/2″ carriage bolts with urethane isolator bushings
- Both wing nuts and nylock nuts are provided for fastening the jack
Before you mount a jack
A Hi-Lift mounted on a rear tire carrier adds weight and leverage to the back of the vehicle, so the mount and its fasteners carry real load every time the jack is moved or stored. Check the carrier and bumper for cracks or loose welds before adding the plate, and retighten the hardware after the first few trail runs.
Bare steel can be painted or powder coated, and a fresh coat helps slow rust where the plate sits against the carrier. Clean and dry the surface before coating, and keep the bolt holes clear so the hardware still seats fully.
- Inspect the carrier and jack bolts before each trip
- Retighten fasteners after the first few runs
- Store the jack so it does not shift against the plate
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-61-010 |
| UPC | 614901728873 |
| Product type | Hi-Lift jack mount plate |
| Material | Steel plate, 3/16″ thick |
| Finish | Bare steel |
| Tire carrier hardware | Grade 8 |
| Jack bolts | 1/2″ carriage bolts with urethane isolator bushings |
| Fasteners for the jack | Wing nuts and nylock nuts |
| Mounts to | Top of the RockBrawler tire carrier |
Vehicle fitment
The jack mount is made for the Poison Spyder RockBrawler Rear Bumper with Tire Carrier, so fit depends on that bumper rather than on one particular vehicle. Confirm your vehicle’s year, model and trim before ordering.
The plate bolts to the RockBrawler tire carrier and is made for that carrier only. Confirm your bumper and carrier match before ordering.
Installation notes
The plate bolts to the top of the tire carrier using the supplied Grade 8 hardware, and the jack is then bolted to the plate. Use either the wing nuts or the nylock nuts to fasten the jack. Paint or powder coat the bare steel first if a finish is wanted.
What’s included
- Hi-Lift jack mount plate
- Grade 8 hardware for the tire carrier
- Two 1/2″ carriage bolts with urethane isolator bushings
- Wing nuts and nylock nuts
Not included: the Hi-Lift jack and the RockBrawler rear bumper with tire carrier.
















