Overview
The Poison Spyder JK Brawler MID front skid, part number 17-63-030, is built around a mid-width, high-clearance front bumper of 3/16-inch plate steel. It is for the 2007–2018 Jeep Wrangler JK.
The bumper ends extend outboard to about half the width of the tires. That adds brush protection for the grille corners and fenders and gives the Jeep a more expeditionary look than rock-crawling bumpers.
The tabs are modeled on the high clearance tabs of Poison Spyder’s hard core BFH series bumpers and are angled to maximize approach angle. The winch sits in a slight depression on the top surface, with plate steel gusseting underneath for maximum strength. The Winch Fairlead Mount is sold separately, so a bumper without a winch keeps a clean, unobstructed top surface. Recessed fog lamp buckets are made from CNC laser-cut DOM tubing and help protect the lamps from rocks.
Key features
- 3/16-inch plate steel, CNC laser cut and precision brake-formed
- Mid-width, high-clearance design
- Ends extend to about half the width of the tires
- Angled recovery tabs for approach angle, machined from 1-inch billet steel
- Accepts 3/4-inch recovery shackles
- Designed to accept most Warn winches and winches with Warn-standard mounting dimensions
- Recessed buckets for the factory fog lamps
- Bare steel only; no powder coat option
Front bumper and winch setup
A front bumper is the mounting point for a winch, recovery points and sometimes lights, so the bumper and the frame under it need to handle the pull. The winch sits on the top surface, and the gusseting carries the load into the frame. Before adding a winch, check the bolt pattern, the winch line path and the clearance to the grille and hood. A bumper that holds a winch well also needs a firm mount to the frame.
Bare steel rusts when left unfinished, so paint or powder coat soon after fitting, paying attention to welds and edges. Inspect the tabs and hardware after each trail trip, since heavy recoveries can stress the mounts. Keep recovery shackles and straps inspected and matched to the load, and give the winch and fairlead their own checks.
- Paint or powder coat bare steel soon after installation
- Check tab bolts and welds after heavy recoveries
- Match shackles and straps to the winch load
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-63-030 |
| UPC | 614901727425 |
| Material | 3/16-inch plate steel |
| Recovery tabs | 1-inch billet steel, angled |
| Shackle size | 3/4-inch recovery shackles |
| Finish | Bare steel |
| Fitment | Direct fit, front skid |
| Installation | No cutting or drilling required |
| Winch | Accepts most Warn winches; fairlead mount sold separately |
Vehicle fitment
It is built for the Jeep Wrangler JK, as the Brawler MID name indicates.
It fits the JK only; TJ, LJ and JL Wrangler models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
No cutting or drilling is needed. The bumper arrives bare, so paint or powder coat it before final installation. A winch is sold separately, and so is the Winch Fairlead Mount.
What’s included
One JK Brawler MID front skid, bare steel, with recessed buckets for the factory fog lamps.
Not included: the winch, the Winch Fairlead Mount and the factory fog lamps.









