Overview
The Poison Spyder 14-02-099-V is a vented aluminum inner fender kit for the Poison Spyder DeFender XC front fenders. Inner fenders sit behind the front fenders and protect the engine compartment from splash. This kit also gives a place to mount under-hood accessories, and the vents let air move through the engine bay, which Poison Spyder says helps the Jeep run cooler.
Each inner fender is a three-piece bolt-together assembly made from CNC laser cut aluminum sheet. The kit makes a complete bolt-in DeFender XC installation possible for owners who lack stock inner fenders, or who would rather sell them than cut and reuse them.
No accessory mounting holes or brackets are included, so the installer chooses where each component mounts. Parts that were on the stock inner fenders can usually be moved to the DeFender XC inner fenders by drilling a hole or making a simple bracket. The stock air box is the main gap, so an aftermarket air intake or an open air filter element, such as a K&N conical filter, is the usual replacement.
The vent openings add airflow to the engine bay, which Poison Spyder describes as a cooling benefit, while the aluminum sheet still gives splash protection to the engine.
Key features
- Vented design for airflow through the engine bay
- Three-piece bolt-together assembly for each inner fender
- CNC laser cut aluminum sheet
- Splash protection for the engine compartment
- Complete bolt-in option for owners without stock inner fenders
- Built to install with DeFender XC front fenders
Vented inner fender airflow
Vents change how the engine bay breathes. Air flows through the openings, but mud and water can also get in, so the vented panel needs regular cleaning. After deep crossings, rinse the inside of the fender and check that the vents are not clogged with grit or leaves.
The air intake is the part most owners rethink with this kind of fender. The stock air box has no mounting here, so the intake needs a new home. An open filter should sit high enough to avoid splash from wading, and its hose must not rub the vented edge. Confirm the intake path before final installation.
- Clear vent openings after wet trail runs
- Keep the intake above splash height
- Check hose contact with the vent edges
- Inspect fasteners after rough trail days
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-02-099-V |
| UPC | 614901724950 |
| Material | Aluminum sheet, CNC laser cut |
| Construction | Three-piece bolt-together |
| Vent | Vented |
| Finish | Bare aluminum |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit for DeFender XC front fenders |
Vehicle fitment
Check your Jeep’s year, model and trim before you order. The kit is made to install with DeFender XC front fenders, so confirm that fender model first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling wherever an accessory is moved to the new inner fender. Because no mounting brackets are included, decide the layout for each accessory before drilling. The air box has no mounting solution in this kit, so plan an intake or open air filter before installing.
What’s included
The vented aluminum inner fender kit, supplied as a three-piece bolt-together assembly for each side.
Not included: the DeFender XC front fenders the kit requires, accessory mounts or brackets, and an air intake or air filter.














