Overview
The Poison Spyder LED resistor kit (part number 41-04-650) is a resistor assembly that equalizes the current load so LED taillights work properly with the Jeep JK’s electrical system. It installs inline in the taillight wiring, and one resistor is needed for each taillight. The kit is sold individually.
It is made for 2-door and 4-door Jeep JK models. Its design is tied to the JK electrical system, so the JK is the reference vehicle for this kit.
Key features
- Equalizes current for LED taillights
- Installs inline in the taillight wiring
- One resistor needed per taillight
- Sold individually
- Written for 2 and 4-door JK models
Why LED taillights need a resistor
Incandescent bulbs draw a fair amount of current, and the vehicle’s flasher and bulb-out sensing are set up around that load. LED taillights draw much less, so the system may read the lights as faulty, flash quickly or show a warning. A resistor placed in the circuit adds load so the original electronics see the expected current.
Each taillight circuit needs its own resistor, so match the quantity to the number of lights you are changing. Work with the power off and a fuse in place, and confirm the connections are secure and insulated. Check the wiring for chafing where it passes near the body or the tailgate hinge.
After installation, test the brake, turn and running lights. Watch for flash rate changes over the first drives, and recheck connections if a light flickers. Keep spare connectors and heat shrink on hand, since resistor wiring is often a good time to refresh tired connections.
- Match resistor count to the number of taillights
- Test brake, turn and running lights after wiring
- Inspect wiring at the tailgate hinge for chafing
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 41-04-650 |
| UPC | 614901728040 |
| Type | LED resistor assembly |
| Installation | Inline in taillight wiring |
| Quantity needed | One per taillight |
| Doors | 2 and 4-door models |
Vehicle fitment
The kit is made for the Jeep JK, which covers the 2007 to 2018 model years in two-door and four-door form. It is also a universal fit part, so confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The resistor installs inline in the taillight wiring, one per taillight. Work on the lighting circuit with the power off and a fuse in place, and check the local rules on taillight operation before driving.
What’s included
One resistor assembly, sold individually.
Not included: the second resistor, which is needed for the other taillight.








