Overview
The Poison Spyder Web cage gusset (part number 43-43-001-W) adds strength to a roll cage at a tube joint and carries the Spyder web design. The gussets are CNC laser cut from 3/16 inch plate steel and measure 3.5 inches by 3.5 inches. Two gussets are included.
Confirm the joint angle of your cage matches the gusset before ordering and before the final welds.
Key features
- CNC laser cut 3/16 inch plate steel
- 3.5 inches by 3.5 inches
- Spyder web design
- Sold as a pair
Welding a roll cage gusset
A roll cage gusset carries load at a tube junction, spreading force from one tube into the other so the joint does not bend or crack under impact. Good welds matter as much as the plate itself. Tack the gusset in place, check the fit against the tubes and the joint angle, then weld the edges in short passes to limit distortion.
Clean the tubes and plate of paint, rust, and coatings where the weld will sit, since contamination weakens the weld. After the cage is complete, inspect the welds and gusset edges for cracks or undercut, especially after hard trail use or a roll-over.
- Grind coatings off the weld area
- Tack and fit before final welding
- Inspect welds after hard use
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 43-43-001-W |
| UPC | 614901728446 |
| Type | Roll cage gusset |
| Material | 3/16 inch steel |
| Size | 3.5 inches by 3.5 inches |
| Angle | 90 degree (short details); 100 tubing joint (description) |
| Quantity | Two gussets, sold as a pair |
Vehicle fitment
Fit the gusset to the tube joint and confirm the joint angle matches the gusset before making the final welds.
Installation notes
The gussets are fitted at the tube joint, and the cage joint angle has to match the gusset. Test the fit before the final welds.
What’s included
Two CNC laser cut 3/16 inch steel web gussets.









