Overview
The Poison Spyder RockBrawler II Hi-Lift jack mount (part number 45-61-011) is a plate that carries a Hi-Lift jack on the RockBrawler II Rear Bumper with Tire Carrier. It is CNC laser cut from 1/4 inch plate steel with the Spyder web design and bolts to the top of the tire carrier using the supplied Grade 8 hardware. The mount gives the jack a fixed place on the bumper.
The jack attaches to the plate with two heavy duty 1/2 inch carriage bolts that have urethane isolator bushings. Both wing nuts and nylock nuts are included, so the owner can choose which to use. The mount ships as bare steel and can be painted or powder coated in any color.
Key features
- Carries a Hi-Lift jack on the RockBrawler II Rear Bumper with Tire Carrier
- 1/4 inch CNC laser-cut plate steel
- Urethane isolator bushings on the carriage bolts
- Wing nuts and nylock nuts both supplied
- Grade 8 hardware for the tire carrier mount
- Ships bare for paint or powder coat
Carrying a jack on the trail
A Hi-Lift jack is heavy and works best when it is fixed in one place where it cannot rattle or shift. A bumper-mounted plate keeps the jack out of the cargo area and makes it available without unpacking. Most of the work is in securing the jack firmly, since a loose jack can work free on rough roads and scrape paint or lights.
Before a trip, check that the carriage bolts and nuts are tight and that the bushings have not flattened or split. Steel can rust where paint is chipped, so touch up scratches promptly. If the tire carrier moves under load, recheck the Grade 8 hardware and the mounting surfaces before driving on rough trails.
- Secure the jack pin and base before driving
- Retighten nuts after rough trail runs
- Touch up chips to prevent rust on bare steel
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-61-011 |
| UPC | 614901728880 |
| Type | Hi-Lift jack mount plate |
| Material | 1/4 inch plate steel |
| Jack bolts | 1/2 inch carriage bolts with urethane isolator bushings |
| Mounting hardware | Grade 8 hardware for the tire carrier |
| Finish | Bare steel |
Vehicle fitment
This mount is made for the RockBrawler II Rear Bumper with Tire Carrier. Confirm the bumper is the RockBrawler II with the tire carrier before ordering.
Installation notes
The plate bolts to the top of the tire carrier with the supplied Grade 8 hardware. Attach the Hi-Lift jack to the plate with the carriage bolts and bushings, and check that the nuts are tight before driving. Paint or powder coat the mount before fitting if a color match is wanted.
What’s included
Jack mount plate in bare steel, carriage bolts with urethane isolator bushings, wing nuts, nylock nuts and Grade 8 mounting hardware.
Not included: the Hi-Lift jack and the RockBrawler II Rear Bumper with Tire Carrier.









