Overview
The Poison Spyder 17-28-A10 is a CB antenna mount for the tailgate of the Jeep Wrangler JK, in both two-door and four-door models. It is for JKs on which the stock spare tire carrier has been removed, and it gives a convenient, easy-to-install place to mount an antenna.
The mount is CNC laser cut and precision brake-formed from 1/8-inch steel, then powder coated in a semi-gloss black. It installs using the two upper-right corner OE spare tire carrier bolts. A 1/2-inch mounting hole accepts standard CB antenna stud mounts.
The mount works alone or together with the JK Tramp Stamp products and the JK license plate mount. For Jeeps with RockBrawler or RockBrawler II rear bumpers with tire carriers, it is a mounting option for the antenna.
Key features
- Mounts to the JK tailgate after the spare tire carrier is removed
- CNC laser cut, precision brake-formed 1/8-inch steel
- Semi-gloss black powder coat finish
- 1/2-inch hole for standard CB antenna stud mounts
- Installs on the two upper-right corner OE spare tire carrier bolts
- Works alone or with JK Tramp Stamp or license plate mount
Antenna placement and cable routing
Where an antenna sits on the tailgate affects both reception and how the vehicle handles trail obstacles. A tall antenna mounted at the rear can catch branches, so check the height before driving in brush. The mount should be positioned so the antenna clears the tailgate opening and does not interfere with the rear window or the tire carrier area.
Cable routing is often the part that gets overlooked. Run the coax along the tailgate and into the cabin through an existing grommet, keeping it clear of hinges, latches and wiring. Secure it with clips so it does not rub. A clean, bare metal ground connection also matters for reception.
- Check antenna height before trail use
- Route coax clear of hinges and latches
- Use clean bare metal for the ground connection
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-28-A10 |
| UPC | 614901727081 |
| Material | 1/8-inch steel |
| Finish | Semi-gloss black powder coat |
| Antenna hole | 1/2-inch, accepts standard CB antenna stud mounts |
| Mounting | Two upper-right corner OE spare tire carrier bolts |
| Fitment type | Direct fit |
Vehicle fitment
This antenna mount is made for the Jeep Wrangler JK, 2007–2018, in two-door and four-door models. It is for JKs on which the stock spare tire carrier has been removed.
It is made for the Jeep Wrangler JK, 2007–2018, in two-door and four-door models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The mount bolts on using the two upper-right corner OE spare tire carrier bolts, so the carrier must be off the tailgate first. No drilling is described. Check the antenna’s stud size before mounting, since the hole is sized for standard CB antenna stud mounts.
What’s included
The black powder coat antenna mount with its 1/2-inch antenna hole.
Not included: the CB antenna and its stud mount.
















