Overview
The Poison Spyder Customs driver-side tail light harness, part number 41-06-010-D, is a plug-and-play wiring harness for LED tail lights. It is designed for the Jeep Wrangler JK and connects to the Jeep’s OE wiring harness. The fitment is universal, so confirm your vehicle before installing it.
The harness is designed to connect directly to LED tail lights, back-up lights and license plate lights sold by Poison Spyder. It is one half of a driver and passenger set, so the driver-side version covers only one side of the rear lighting.
Key features
- Driver-side harness for one side of the rear LED lighting
- Plug-and-play design, with no soldering described
- Connects to the OE wiring harness and to Poison Spyder LED tail, back-up and license plate lights
Checking rear lighting connections
Rear lighting harnesses live in a crowded, moisture-prone area, so connector condition matters. Before buying or installing, look at the existing plugs for corrosion, bent pins and melted housings. Clean any contacts with electrical contact cleaner, and replace damaged connectors rather than forcing a mismatched plug.
LED tail lights often change how the vehicle’s bulb-out and flasher systems respond. Test brake, turn, backup and license plate lights with the ignition on before reinstalling trim. Any flicker or warning message should be traced to the connection before the panels go back on.
Keep the driver and passenger sides matched so both lights behave the same way. Secure the harness away from the tailgate hinge and sharp body edges, and use dielectric grease on the plug contacts.
- Look for corrosion or bent pins in the existing plugs
- Test each light before reinstalling trim
- Keep the driver and passenger sides matched
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 41-06-010-D |
| UPC | 614901728071 |
| Position | Driver side |
| Connection | Plug and play |
Vehicle fitment
This harness is designed for the Jeep Wrangler JK, and it is a universal fit part. Confirm your vehicle’s year, model and trim before ordering.
Harnesses for other Jeep generations are separate products; check the part number against your rear lighting.
Installation notes
The harness is designed to plug into the vehicle’s OE wiring harness and into the Poison Spyder LED lights. Check that the connectors match your existing harness before installing.









