TeraFlex
Showing 433–480 of 485 resultsSorted by popularity
-
-
Tie Rod End
TeraFlex Heavy-duty Offset Tie Rod End – 4920231
- TeraFlex 4920231 heavy-duty offset tie rod end with left hand thread
- Small taper, 7/8 inch x 18 TPI thread
- One-ton joint end with offset for differential clearance
- Small taper suits the stock Jeep taper and Dana 30 knuckle holes.
SKU: TER4920231 -
-
-
-
Steering Kit
TeraFlex Complete High Steer System with HD Tie Rod and Drag Link Flip – 4391000
- TeraFlex complete high steer system with HD tie rod and flipped drag link, part 4391000
- Designed for 4 to 6 inch lift on Wrangler JK
- Listed fitment: 2007 to 2016 Jeep Wrangler (JK), including Unlimited trims
- Includes driver and passenger high steer knuckles, frame brace kit and trackbar drop bracket; welding required
SKU: TER4391000 -
Disc Brake Calipers, Disc Brake Pad and Rotor Kits
TeraFlex Disc Brake Conversion Kit (Natural) – 4354420
Disc Brake Calipers, Disc Brake Pad and Rotor KitsTeraFlex Disc Brake Conversion Kit (Natural) – 4354420
- Rear disc brake conversion for the 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ
- Rotors with dual drilled 5 x 4.5 and 5 x 5.5 lug pattern
- Backing plates, calipers with pads, rotors and flex hoses
- TeraFlex 4354420
SKU: TER4354420 -
Disc Brake Calipers, Disc Brake Pad and Rotor Kits
TeraFlex Rear Disc Brake Conversion (Natural) – 4354410
Disc Brake Calipers, Disc Brake Pad and Rotor KitsTeraFlex Rear Disc Brake Conversion (Natural) – 4354410
- Rear disc brake conversion for the 1987–1995 Jeep Wrangler
- Fits XJ Cherokee non-c-clip rear axles and D44 axles through 1988
- Bolt-on; includes everything needed to convert
- TeraFlex 4354410
SKU: TER4354410 -
Dana 44 Oil Seals
TeraFlex High Performance Tera30/44 Front Axle Tube Seals – 4354050
- Billet 6061-T6 aluminum front axle tube seals for oversized 3.25 inch tubes on Tera30 and Tera44 JK housings.
- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited, two- and four-door models.
- Outer triple O ring presses into the housing; inner double seal with a grease pocket.
- Specify axle tube thickness when ordering.
- Part number 4354050, UPC 843885033134.
SKU: TER4354050 -
-
Driveshaft CV Socket Yoke Assembly
TeraFlex Rzeppa High Angle Factory Replacement CV Kit – 1744014
- Factory replacement CV joint kit with high-angle housing
- Built for Wrangler JK with 3 or more inches of lift
- Includes CV assembly, cap and boot, bolt flanges and low-friction CV grease
- TeraFlex part number 1744014
SKU: TER1744014 -
-
-
-
Sway Bar Assemblies
TeraFlex Trail S/T Front Sway Bar System – 1743615
- TeraFlex 1743615 front Trail S/T sway bar system, single rate
- Trail rate only with an engagement knob for street and trail
- Includes sway bar links and hardware
- Fits 2004-2006 Jeep Wrangler LJ and 1997-2006 Wrangler TJ models
SKU: TER1743615 -
-
Lift Kits
TeraFlex 3 Inch Lift Kit with Track Bar – 1151222
- Fits the 2007-2015 Jeep Wrangler JK (2-door models per TeraFlex)
- 3 inch lift coil springs with front adjustable track bar
- Includes sway bar disconnects, rear links, bump stops, hardware
- Shocks not included; allows up to 35 inch tires
SKU: TER1151222 -
-
Steering Stabilizer Bracket
TeraFlex Steering Stabilizer Relocation Kit – 1123160
- Fits 2007–2016 Jeep Wrangler (JK) models, Unlimited included
- Moves the steering stabilizer up nearly 2.5 inch
- 6061 aluminum clamp with forged 10.9 stud
- Fits TeraFlex HD tie rod part TER1853910 or tie rods with 1-5/8 inch diameter tubing
SKU: TER1123160 -
-
-
-
Leaf Spring Shackle Kit
TeraFlex Revolver Shackles – 1033000
- Fits the rear of 1976–86 Jeep CJ models and the front of 1987–95 Jeep Wrangler YJ models
- Hinged design lets leaf springs flex and compress without additional spring stress
- Self-supporting; folds against itself on level ground
- Bolt-on kit that can be installed with aftermarket suspension systems
- Sold as a pair; part number 1033000
SKU: TER1033000 -
Shock Absorbers
Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit
- TeraFlex Falcon Series 3.3 Fast Adjust piggyback shock kit, part 03-01-33-400-002
- Fits 2007–2017 Jeep Wrangler (JK) Unlimited trims
- Fast Adjust knob for quick compression adjustments
- Covers a 0-2 inch lift range
- Sold as a set
SKU: TER03-01-33-400-002 -
Shock Absorbers
Falcon Series 3.1 Piggyback Shock Absorber Kit
- TeraFlex Falcon Series 3.1 piggyback shock kit, part 03-01-31-400-253
- Fits 2007–2017 Jeep Wrangler (JK) Unlimited models
- Hydraulic piggyback design for 2.5 to 3.5 inch lifts
- Sold as a set; front and rear shock designs differ
SKU: TER03-01-31-400-253 -
-
-
-
Sway Bar Bushings & Brackets
TeraFlex Quick Disconnect Lower Stud Kit – 1943705
- TeraFlex 1943705 lower quick disconnect stud kit for sway bar lower links
- Includes hitch pin clip, large pin retainer washer, flat washer and lock nut
- Fits 2 and 4-door models
- Part number 1943705, UPC 843885024446
SKU: TER1943705 -
Sway Bar Bushings & Brackets
TeraFlex Front Axle Bracket Swaybar Mount – 4000010
- TeraFlex 4000010 front axle bracket sway bar mount for 1997 to 2006 Jeep Wrangler TJ, Rubicon and Unlimited
- Laser-cut 3/16 steel, bare, welding required
- Designed for Dana 44 or Dana 60 axles with 3 in. axle tube
- Part number 4000010, UPC 843885014874
SKU: TER4000010 -
-
-
License Plate Frames and Covers
TeraFlex License Plate Delete Badge – 4798000
- Fills the hole left when the stock JK rear license plate is moved
- Die cast zinc alloy with black chrome finish
- Part number 4798000, for 2-door and 4-door models
- Installs with double-sided tape; no light included
SKU: TER4798000 -
-
-
-
-
Suspension Leveling Kits
TeraFlex .50 Inch Leveling Lift Kit – 1953100
- half-inch front leveling spacer for 2007–2018 Jeep Wrangler JK, sold individually
- Covers 2-door JK Wranglers, 4-door JK Unlimiteds and all JK Rubicon models
- Black polyurethane coil spring spacer, part number 1953100
SKU: TER1953100
