Overview
The TeraFlex Tie Rod Large Taper Insert Sleeve, part number 600242, is a tapered insert sleeve used for mounting tie rod ends in steering conversions such as the high steer conversion kit.
The tapered insert uses a factory Dodge Dana 60 taper and requires a 0.875 inch OD hole. It is sold individually.
Key features
- Tapered insert sleeve for mounting tie rod ends
- Utilizes a factory Dodge Dana 60 taper
- Requires a 0.875 inch OD hole
- Used in steering conversions such as a high steer conversion kit
- Supplied individually
Setting up a tapered sleeve
A tapered insert sleeve gives a tie rod end a seat in a hole that has been machined to fit it. Before installation, measure the hole and the tie rod end shank, and confirm the hole is clean, round and free of burrs. A sleeve that sits loosely can allow movement at the joint, which shows up as wander or play in the steering.
Steering conversions put more load on the joint than a stock arrangement, so the sleeve, the hole and the fasteners all need to be sound. Press the sleeve in square, then install the tie rod end and tighten it to the specified value. Recheck the fasteners after the first few drives and inspect the joint for play at regular service intervals.
- Deburr the hole before pressing the sleeve
- Confirm the tie rod end matches the sleeve taper
- Check steering clearance through full travel
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 600242 |
| UPC | 843885017257 |
| Product type | Tie rod large taper insert sleeve |
| Taper | Factory Dodge Dana 60 taper |
| Required hole | 0.875 inch OD |
| Quantity | Individually (one per part) |
| Fitment type | It is a universal fit part, not built for a specific vehicle. |
Vehicle fitment
The sleeve is a universal fit part with no vehicles attached. The Dodge Dana 60 taper is the sleeve’s own taper size, not a vehicle fitment. Confirm your tie rod ends and the 0.875 inch OD hole before ordering.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- No vehicle is attached to this sleeve. Its Dodge Dana 60 taper is the sleeve shape, not a vehicle fit. Confirm your tie rod ends and the 0.875 inch OD hole before ordering.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
One tapered insert sleeve.









