Overview
The TeraFlex 4915161 is a large FlexArm rubber replacement bushing for control arms that accept a 9/16 inch bolt. The rubber joint provides articulation and durability for off-road travel.
The bushing must be pressed in for proper installation. The rubber joint is maintenance free, and no vehicle, year or chassis code is named.
Key features
- Large FlexArm rubber replacement bushing
- Maintenance free rubber joint
- Superior vibration damping, reduced road noise and no clunks, per the brand
- Maintains position for maximum articulation during travel
- Accepts a 9/16 inch bolt
Pressing in control arm bushings
Control arm bushings are pressed into the arm eye, and a rubber bushing relies on a snug fit to stay in place under load. Before pressing, check that the bore is clean and free of burrs, and that the new bushing lines up with the bore so it does not cock sideways.
A press, sleeve or suitable adapter keeps the load even as the bushing goes in. Go slowly and stop if the bushing starts to bulge or tear, since damaged rubber can clunk or fail early. Use a lubricant only if it is approved for rubber, because some greases can swell the material.
Once the arm is back on the vehicle, recheck the pinch bolt and the fasteners after the first few drives and look for any movement at the bushing.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4915161 |
| UPC | 843885026310 |
| Joint type | Rubber |
| Bolt size accepted | 9/16 inch |
| Installation | Pressed in |
Vehicle fitment
No vehicle year, model or chassis code is named, so fit has to be confirmed. Control arm bushings are sized for specific arms, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bushing must be pressed in, so it is not a simple bolt-in part. Use a suitable press and take care not to damage the joint during installation.
What’s included
Check the package contents against your installation before starting.








