Overview
The TeraFlex steering stabilizer relocation kit, part number 1123160, raises the steering stabilizer nearly 2.5 inch on 2007–2016 Jeep Wrangler (JK) models. The higher position helps reduce damage to the stabilizer shaft or body and reduces the tie rod roll that causes a dead spot of unresisted movement in steering.
The kit is built for 2- and 4-door models and is designed to work with TeraFlex HD tie rods or tie rods with 1-5/8 inch diameter tubing. It uses a 6061 aluminum clamp and a forged 10.9 stud.
Key features
- Raises the steering stabilizer nearly 2.5 inch
- 6061 aluminum clamp
- Forged 10.9 stud
- Designed for 2- and 4-door models
- Works with TeraFlex HD tie rod TER1853910 or 1-5/8 inch diameter tubing
Stabilizer height and steering geometry
Moving the stabilizer up changes the angle it works through, so the force it applies to the tie rod changes too. The reasoning behind the design is that a higher position reduces stress on the shaft and body and limits the tie rod roll that can leave a dead spot in steering. Any relocation changes how the linkage moves through its arc, so watch the steering feel closely after installation.
Clearance is the first thing to check. Turn the wheels to full lock and watch the bracket, clamp and stud for contact with the tire, knuckle or frame. Keep the tie rod in good condition, since the kit is designed to work with a compatible tie rod, and replace any worn ends before the relocation goes in.
- Check clearance at full left and right lock
- Look for wear on the stud threads and clamp
- Recheck torque after the first few drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1123160 |
| UPC | 843885036203 |
| Stabilizer relocation | Nearly 2.5 inch upward |
| Clamp material | 6061 aluminum |
| Stud | Forged 10.9 |
| Compatible tie rod tubing | 1-5/8 inch diameter |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK), including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and the Unlimited versions of those trims.
Earlier Wrangler generations and later model years are not covered. Before ordering, match your vehicle’s year, model and trim.
What’s included
The kit includes the relocation bracket with its 6061 aluminum clamp and forged 10.9 stud.
Not included: the steering stabilizer and the tie rods, which the kit is designed to work with.









