Overview
The TeraFlex 1101255 brake line anchors are a pair of front anchors, 5 inch long, that locate the front brake line on the Jeep Wrangler JK, 2007-2018, so it stays clear of the tire through full suspension travel.
The secure mounting stops unnecessary movement of the flexible brake line and the ABS wheel speed sensor wire. A stainless steel gripper can be bent and positioned for the clearance and location needed, and molded rubber holds the brake line with a recessed channel for the sensor wire.
Key features
- Front anchors, supplied as a pair
- 5 inch long with a .50 bolt hole
- Stainless steel gripper that can be bent into position
- Molded rubber retains the line and has a channel for the wheel speed sensor wire
- Installs using the lower shock mount bolt
- 8 UV resistant nylon cable ties included
How it works
A flexible front brake line moves with the axle and steering, so a loose hose can swing into the tire, the wheel speed sensor wire or the suspension. An anchor holds the line at a set point so its movement stays in a controlled arc. Because the line is only held at one place, the anchor location has to be chosen with the full range of travel in mind.
When fitting anchors, keep the sensor wire in its channel and check that the line does not pull on the fitting at either end. Look at the line through full steering lock and full suspension compression. Rubber retainers can age and crack, so inspect them with the rest of the front brake system.
- Check clearance at full steering lock
- Keep the sensor wire seated in its channel
- Inspect rubber retainers during brake service
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1101255 |
| UPC | 843885040842 |
| Product type | Brake line anchor kit |
| Position | Front |
| Length | 5 inch |
| Bolt hole | Diameter .50 |
| Gripper material | Stainless steel |
| Quantity | Pair (2 anchors) |
| Cable ties | 8 UV resistant nylon |
| Fit type | Direct fit |
Vehicle fitment
The anchors fit the 2007-2018 Jeep Wrangler JK. The Wrangler TJ, JL and the Gladiator are different vehicles and are not covered. Confirm your vehicle’s year, model and trim before ordering.
No fitment list is published for this kit, so check that your Wrangler is a JK before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The anchors mount with the lower shock mount bolt. After bending the stainless steel gripper to suit your tire and lift, check that the line and sensor wire move freely through full suspension travel.
What’s included
2 brake line anchors and 8 UV resistant nylon cable ties.









