Overview
The TeraFlex axle gusset, part number 4990910, is a pair of lower inner knuckle gussets for JK front axles. They reinforce the factory knuckles on Dana 30 or 44 axles and are designed for all JK Wrangler models, including Rubicon and Unlimited.
The gussets help keep the factory knuckles from bending or breaking under extreme conditions.
Key features
- Lower inner knuckle gussets for JK front axles
- Reinforces Dana 30 or 44 factory knuckles
- Includes two gussets, sold as a pair
- Designed for all JK Wrangler models, including Rubicon and Unlimited
Knuckle loads on the trail
Front knuckles take steering, braking and impact loads, and on a trail rig they see the sort of twisting that factory parts were not designed around. Reinforcing the lower inner section helps spread those loads, but the knuckle still relies on its bearings, seals and ball joints to work properly. Gussets are one piece of a stronger front end, so keeping the rest of the axle in good shape matters just as much.
After installation, check the knuckle for new cracks, look for grease leaks from the seals, and confirm the steering components have no play. Ball joints and tie rod ends often wear at the same time as knuckles get stressed, so replacing them during a rebuild is a practical choice. Re-inspect the gussets and their attachment after rough trail days, since repeated flex can loosen a fit over time.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4990910 |
| UPC | 843885014973 |
| Position | Front, lower inner knuckle |
| Quantity | Pair (two gussets) |
| Axle | JK Dana 30 or 44 factory axle |
| Application | JK Wrangler, including Rubicon and Unlimited |
Vehicle fitment
They are for JK Wrangler front axles with Dana 30 or 44 factory knuckles, which places them in the 2007 to 2018 Jeep Wrangler JK. They are designed for all JK Wrangler models, including Rubicon and Unlimited.
Gussets for TJ, LJ, JL or JT Wranglers are not covered, since those are separate models.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the axle is a JK Dana 30 or 44 before fitting, since the gussets are made for those factory knuckles only.
What’s included
Two lower inner knuckle gussets, sold as a pair.
Not included: Hardware and welding supplies.







