Overview
The TeraFlex 1141300 is a 3 inch coil spring lift kit for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ). TeraFlex says its kit was the first TJ Wrangler lift on the market, and it is designed to improve off-road performance while keeping a quality highway ride.
The kit includes springs, rear sway bar links, a rear track bar bracket, bump stops and all the hardware needed for installation. Shocks are not included, and the maximum tire size is 32×10.50.
Key features
- 3 inch lift height
- Coil springs
- Rear sway bar links
- Rear track bar bracket
- Bump stops included
- All necessary hardware included
- Maximum tire size 32×10.50
Rear links and bump stops
The rear of a coil spring lift changes how the axle sits under the frame, so the sway bar links and track bar are worked on as part of the install. Links with worn bushings can clunk on uneven pavement and cause the axle to shift under braking. Check the ends and bushings once the lift is settled.
Bump stops control how far the suspension can compress before metal contact. Cracked or crumbling stops reduce that cushion, and a lift often makes them more important on trail obstacles. A new set costs little compared with axle or frame damage, so replace them when they look worn.
- Torque all hardware again after the first trail run
- Inspect sway bar link bushings for splits
- Check the track bar bracket welds for cracks
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1141300 |
| UPC | 843885019626 |
| Lift | 3 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Rear lift method | Coil springs |
| Max tire size | 32×10.50 |
| Shocks | Not included |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon models, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary, Rubicon, SE, Sahara, Sport and X models.
Confirm your vehicle’s year, model and trim fit this kit before placing an order.
Installation notes
The kit includes a rear track bar bracket and rear sway bar links, so the track bar and rear sway bar are changed as part of the install. Check the alignment after installation, and confirm the shock length for the 3 inch lift before ordering.
What’s included
The kit includes the springs, rear sway bar links, a rear track bar bracket, bump stops and all necessary hardware required for installation.
Not included: Shocks.









