Overview
The TeraFlex high steer kit, part number 990175, is a driver side tapered insert sleeve for mounting tie rod ends in steering conversions, including the high steer conversion. The sleeve uses a factory stock TJ taper and requires a 0.75 in. OD hole.
It comes as one piece. TeraFlex names the TJ taper but gives no vehicle years or models for this sleeve, so check the taper against your tie rod end before ordering.
Key features
- Driver side
- Tapered insert sleeve for tie rod ends
- Factory stock TJ taper
- Requires a 0.75 in. OD mounting hole
- Single piece per package
Choosing a tie rod end
The tapered insert sleeve is only part of the steering link, so the tie rod end paired with it matters as much as the sleeve. Tapers must match closely, because a loose fit lets the end rotate in the sleeve and wear the taper quickly. Before buying a tie rod end, measure its taper, compare it with the sleeve, then check thread engagement and the locking method.
High steer conversions also change steering geometry, so tie rod length and angle can shift. Recheck toe after the conversion and after any change to the sleeve. Keep the mounting hole clean and square, because an oversized or out-of-round hole lets the sleeve move under load.
- Clean the mounting hole and remove burrs before pressing the sleeve
- Check tie rod ends for play after the first few trail outings
- Replace the sleeve and tie rod end together if either shows wear
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 990175 |
| UPC | 843885019473 |
| Side | Driver |
| Taper | Factory stock TJ taper |
| Hole size | 0.75 in. OD |
| Quantity | 1 (single piece) |
Vehicle fitment
The sleeve is a driver side tapered insert with a factory stock TJ taper, so its fit depends on matching the taper of your tie rod end and steering arm rather than on a specific vehicle. Confirm that taper before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Size the mounting hole to 0.75 in. OD before fitting the sleeve. Follow the instructions for your steering conversion for installation steps.
What’s included
One driver side tapered insert sleeve.
Not included: tie rod ends, which the sleeve is used to mount.









