Select your vehicle
-13%

Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit

TeraFlex

Shop Jeep Wrangler JK Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • TeraFlex Falcon Series 3.3 Fast Adjust piggyback shock kit, part 03-01-33-400-002
  • Fits 2007–2017 Jeep Wrangler (JK) Unlimited trims
  • Fast Adjust knob for quick compression adjustments
  • Covers a 0-2 inch lift range
  • Sold as a set

Description

Overview

The TeraFlex Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit, part number 03-01-33-400-002, is a set of piggyback shocks built for the Jeep Wrangler JK. It is designed for a 0-2 inch lift and fits 2007–2017 Jeep Wrangler (JK) Unlimited trims.

TeraFlex designs the front and rear shocks as separate, corner specific units. The front shock places its reservoir horizontally to add clearance with large tires during articulation and turning, and it uses an offset upper stud to move the body away from the frame. The rear shock positions the body and reservoir at the bottom, which TeraFlex says reduces shaft damage from rocks kicked up by the tires. The outboard mounting increases clearance on lifted vehicles with raised track bar brackets.

Key features

  • Piggyback design, which TeraFlex says increases fluid flow by 6x over restricting reservoir hose designs
  • Fast Adjust knob (Series 3.3) for quick compression adjustments
  • Front reservoir positioned horizontally for clearance during articulation and turning
  • Front offset upper stud for additional frame clearance
  • Rear reservoir at the bottom to reduce shaft damage from kicked-up rocks
  • Outboard mounting for lifted vehicles with raised track bar brackets
  • Upgradeable in stages
  • Designed for a 0-2 inch lift range.

Using Fast Adjust on the trail

A compression knob lets you change how firmly the shock resists compression without taking the wheel off. Trail conditions vary, so a softer setting can help on rocky ground, while a firmer setting helps control body motion on fast gravel. Make small changes and test them on a familiar stretch before a longer run, since the feel changes with tire pressure and load.

Staged upgrades are common with piggyback shocks. Many owners change springs, tires or bumpers over time, and each change alters how the shocks work. After any change, recheck clearance at the front reservoir and the upper stud under full articulation. Keep the reservoir hoses free of rubbing and make sure the mounting bolts stay tight.

  • Note the knob position before each trip
  • Recheck reservoir clearance after tire changes
  • Inspect bushings and mounts at regular service

Specifications

Brand TeraFlex
Part number 03-01-33-400-002
UPC 843885040286
Product line Falcon Series 3.3
Shock type Piggyback, hydraulic
Adjustment Fast Adjust knob for compression
Lift range 0-2 inch
Fitment type Direct fit
Sold as Set

Vehicle fitment

It fits the 2007–2017 Jeep Wrangler (JK) Unlimited in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.

Coverage is for Unlimited trims. Other Wrangler generations and other Jeep models are outside this kit’s coverage. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check frame and tire clearance after installation, especially on lifted vehicles. Set compression with the Fast Adjust knob once the shocks are in place. Support the vehicle safely on stands while working on the suspension.

What’s included

The kit is sold as a set. Check the package contents against your installation before starting.

SKU: TER03-01-33-400-002 Category:

Specification

Shipping weight 44.50 lbs
Package dimensions 37.00 × 27.50 × 10.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–2017Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TeraFlex Falcon Series 3.3 fit my Jeep Wrangler JK?

Yes, for Unlimited trims. Part 03-01-33-400-002 fits the 2007–2017 Jeep Wrangler (JK) Unlimited, including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. If you drive a two-door JK, confirm your year, model and trim before ordering.

What lift height does the Falcon Series 3.3 support?

The Falcon Series 3.3 is made for a 0-2 inch lift. Its outboard mounting suits lifted vehicles with raised track bar brackets, and the offset front upper stud adds frame clearance.

Is the TeraFlex Falcon Series 3.3 sold as a set?

Yes, the kit is sold as a set. It includes the Fast Adjust knob for quick compression adjustments, and the kit can be upgraded in stages. Check the package contents against your installation before starting.

Do piggyback shocks need periodic maintenance?

Yes. Inspect the body, reservoir hoses and mounts for leaks, cracks or looseness at regular service intervals. Check bolt tightness after the first few trail runs. Replace any shock that leaks or feels inconsistent on the trail.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Shock Absorbers on Amazon