Overview
The TeraFlex Heavy-Duty Tie Rod, part number 4920251, is a 1-1/2 inch hexagon 6061 T6 aluminum tie rod for use with the TeraFlex Dana 30 High Steer Knuckle. It fits the 1997-2001 Jeep Cherokee (XJ) and the Jeep Wrangler (TJ and LJ).
The tie rod is designed to work with the TeraFlex heavy-duty drag link in a kit that upgrades a high steer steering system. The 6061 T6 aluminum has a higher specific strength than 1018 steel, a yield strength of 45,000 lbs., and is about 3 times lighter. It deflects 3 times further than steel while returning to its original shape.
Key features
- 1-1/2 inch hexagon tube made of 6061 T6 aluminum
- For use with the TeraFlex Dana 30 High Steer Knuckle
- Small taper
- Hex shape lets you hold the tube with a 1-1/2 inch wrench while tightening jam nuts
- Aluminum is 3 times lighter than steel
- Yield strength of 45,000 lbs.
Steering geometry basics
Tie rods link the steering box or drag link to the knuckles, so they set the wheel angle with every turn. Their length also affects toe, which is why alignment should be checked after any tie rod or steering work. Small changes in toe can cause tire wear and wandering on the road.
Aluminum tubes flex more than steel under load, which can change the feel of the steering. Tie rod ends wear over time and can create play that feels like loose steering. Inspect the ends and boots regularly, and check the jam nuts are tight before driving the truck.
- Check tie rod ends for play with the wheel turned
- Inspect boots for tears and grease leaks
- Use new jam nuts when reinstalling
- Have alignment checked after any change
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4920251 |
| UPC | 843885026402 |
| Product type | Heavy-duty tie rod |
| Tube | 1-1/2 inch hexagon |
| Material | 6061 T6 aluminum |
| Taper | Small taper |
| Intended use | TeraFlex Dana 30 High Steer Knuckle |
| Yield strength | 45,000 lbs. |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the TeraFlex 4920251 tie rod covers:
- 1997–2001 Jeep Cherokee (XJ) (Classic, Country, Limited, SE, Sport)
- 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
It fits the 1997-2001 Cherokee (XJ), 2004-2006 Wrangler (LJ) and 1997-2006 Wrangler (TJ). The YJ and ZJ steering systems are not covered. Match your vehicle’s year, model and trim to these years before ordering.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to specification and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
A heavy-duty tie rod. Inspect the contents against your installation before starting, including the ends you plan to use.
Not included: Not included: the TeraFlex Dana 30 High Steer Knuckle, the TeraFlex heavy-duty drag link and tie rod ends.












