Overview
The TeraFlex Rear Trackbar Bracket, part number 1954202, is a rear track bar bracket for 2 and 4-door models with a 2-3 inch lift.
It returns the track bar to its natural position, which keeps the rear axle correctly centered under the vehicle with no binding or interference with other components. It is a direct fit part with a frame side mounting position.
Key features
- Returns the track bar to its natural position
- Keeps the rear axle correctly centered under the vehicle
- No binding or interference with other components
- Designed for 2 and 4-door models with a 2-3 inch lift
- Direct fit with frame side mounting
Rear track bar geometry
The rear track bar controls side-to-side axle movement, and its bracket sets where that bar mounts. When the bracket shifts or the lift changes the bar angle, the axle can drift off center. Correct geometry keeps the axle tracking straight and reduces stress on the bushings. A tight, aligned bar is easier to live with on long drives.
Bracket replacement often goes with a new track bar, bushings, or a set of mounting bolts. Inspect the frame mount for cracks, because bracket loads concentrate there. After fitting, drive a short route and listen for clunks or pull, then recheck the bolts.
- Check bar angle at ride height
- Inspect frame mount welds
- Replace worn bushings with the bracket
- Retorque fasteners after the first drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1954202 |
| UPC | 843885024934 |
| Part type | Rear trackbar bracket |
| Lift height | 2-3 inch lift |
| Body style | 2 and 4-door models |
| Fitment type | Direct fit |
| Mounting position | Frame side |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. This bracket is for 2 and 4-door models with a 2-3 inch lift, and it mounts on the frame side.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm your suspension height falls within the 2-3 inch lift range before fitting. After fitting, recheck track bar alignment and rear axle centering.
What’s included
Count the bracket and hardware against your installation before starting.







