Overview
The TeraFlex 1744000 is a rear adjustable track bar, part number 1744000, for the Jeep Wrangler TJ and LJ models. It adjusts to center the rear tires under the vehicle. Its design uses the threaded features of the FlexArm.
The rear track bar rotates to reduce track bar binding and increase rear wheel droop. A greaseable zerk fitting lubricates the moving parts. Confirm fit for your vehicle’s year, model and trim before ordering, since fit is confirmed for TJ and LJ models.
Key features
- Adjusts to center the rear tires under the vehicle
- Threaded design features from the FlexArm
- Rotates to reduce track bar binding and increase rear wheel droop
- Greaseable zerk fitting for the moving parts
- Fits TJ and LJ models
Keeping a rotating bar working
A rotating track bar works by letting its joint move as the axle and frame change position, which reduces binding in articulation. That motion puts load on the pivot and threads, so grease and periodic inspection matter. The adjustable length is used to center the rear tires, and changes should be followed by an alignment check.
Zerk fittings can be blocked by dirt or paint, so clean the fitting before greasing and confirm grease reaches the moving surfaces. Watch for play in the pivot, clicking during articulation or a bar that has shifted off center. Keep an eye on the mounting hardware after rough trail use.
- Clean the zerk before greasing
- Inspect the pivot for play
- Recheck rear tire centering after adjustment
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1744000 |
| UPC | 843885023166 |
| Position | Rear |
| Adjustment | Adjustable rear track bar |
| Design | Rotating, threaded |
| Lubrication | Greaseable zerk fitting |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the 2004–2006 Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims.
Confirm fit for your vehicle’s year, model and trim before ordering, since JK Wrangler models fall outside the TJ and LJ fitment.
Installation notes
The bar rotates to reduce binding and has a greaseable zerk, so grease the fitting after installation. Adjust the bar to center the rear tires, then have the alignment checked, since changing the bar length moves the rear axle position.
What’s included
Check the package contents, including the hardware and piece count, against your installation before starting.
Not included: Check the mounting hardware needed for your installation before starting.









