Overview
The TeraFlex 4000010 is a front axle bracket swaybar mount for the 1997 to 2006 Jeep Wrangler TJ, including Rubicon and Unlimited models. It is laser cut from 3/16 steel and supplied bare, so the bracket is meant to be welded to the axle rather than bolted on.
The bracket is formed to position the sway bar for correct suspension geometry. It is designed for Dana 44 or Dana 60 front axles with a 3 in. diameter axle tube.
Key features
- Laser cut from 3/16 steel
- Bare steel, ready for welding and paint or powder coating
- Designed for Dana 44 or Dana 60 axles with a 3 in. diameter axle tube
- Front sway bar mount for TJ Wrangler, Rubicon and Unlimited
- Welding required
Before welding the bracket
A welded axle bracket depends on careful preparation. Clean the mounting area of paint, rust and grease, and check that the axle tube is straight and sound before setting the bracket. Test-fit the sway bar to confirm the bracket position gives proper clearance and link geometry.
Welding a bracket to an axle tube puts heat into the housing, so work from a plan and avoid overheating the tube. Have a qualified welder complete the work, and inspect the welds after installation for cracks. Recheck the sway bar height and the ride after the first drives, since small changes in bracket position affect how the suspension behaves.
If paint or powder coating is planned, apply it after the welds are inspected and cooled. Protect exposed steel from moisture to keep the bracket from rusting.
- Clean the axle tube before fitting
- Test-fit the bar before welding
- Inspect welds for cracks after installation
- Recheck clearance after the first drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4000010 |
| UPC | 843885014874 |
| Material | Steel |
| Steel thickness | 3/16 in. |
| Finish | Bare steel, ready for paint or powder coat |
| Axle compatibility | Dana 44 or Dana 60 |
| Axle tube diameter | 3 in. |
| Mount location | Front axle |
Vehicle fitment
Fitment is inferred from the stated years and TJ model: 1997 to 2006 Jeep Wrangler TJ, Rubicon and Unlimited, based on the product’s stated fit.
The bracket is built for the TJ generation, which differs from the 2007 to 2018 Wrangler JK and the 2004 to 2006 Wrangler LJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so have the bracket welded by someone experienced with axle work. Wear eye and skin protection when welding or grinding.
What’s included
Confirm the quantity before ordering, since one mount or a pair may be supplied.
Not included: welding supplies and paint or powder coat.






