Overview
The TeraFlex 86261 is a rear disc brake preload spacer for TJ Wranglers that use a disc brake conversion kit. It measures 2-7/8 in OD by 2-1/4 in ID, is 0.228 in thick and is sold individually.
It is designed for TJ Wranglers, so match the spacer to your rear disc brake conversion before fitting.
Key features
- Designed for the rear disc brake kit preload on TJ Wranglers
- 2-7/8 in outside diameter and 2-1/4 in inside diameter
- 0.228 in thickness
- Sold individually
Spacer and preload basics
A preload spacer sits between the hub and the rotor or bearing assembly, and it sets the position that keeps the bearings seated correctly. On a disc conversion, the spacer works with the new hub arrangement so the rotor runs true and the wheel turns freely. Small changes in stack height can change bearing preload, which is why spacers are usually checked whenever rear brake parts are replaced.
When assembling the rear end, inspect the bearing surfaces and axle end for wear or damage before fitting the spacer. Keep the spacer clean and flat, and replace any part that is bent or scored. Re-check wheel rotation and brake drag after the first short drive, because a preload problem often shows up as heat or a rough feel at the hub.
- Inspect bearing seats before assembly
- Keep spacer faces clean and flat
- Check for heat at the hub after the first drive
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 86261 |
| UPC | 843885000150 |
| Position | Rear |
| Outside diameter | 2-7/8 in |
| Inside diameter | 2-1/4 in |
| Thickness | 0.228 in |
| Quantity | Sold individually |
Vehicle fitment
It is designed for TJ Wranglers that use a rear disc brake conversion kit. The TJ chassis code covers the Jeep Wrangler (TJ).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the instructions included with your rear disc brake conversion kit before fitting the spacer.
What’s included
One brake preload spacer.









