Overview
The Rubicon Express RE1482 is a pair of 5/16 inch leaf spring center pins with nuts, made for leaf spring applications. Rubicon Express says to choose the pin diameter for your application before ordering.
The pins are longer than needed, and Rubicon Express says they are meant to be cut down after installation. The pair comes with nuts.
Key features
- 5/16 inch pin diameter
- Sold as a pair, with nuts
- Pin length can be cut down to fit after installation
- Designed for leaf spring applications
- It has a universal design for leaf spring applications.
Before cutting pins to length
Center pins locate the leaf spring pack on the axle perch and keep the leaves from shifting side to side under load. Because the pin is the point where the pack is held in place, the fit matters as much as the length. Test the pin in the spring eye and perch before any cutting, and confirm the diameter is correct for the holes you already have.
Mark the cut line with the pin installed and the axle at its normal ride height. A cutoff wheel or hacksaw works well, and a file or deburring tool should remove sharp edges so the nut seats cleanly. Leave enough thread for the nut to engage fully. Once the pins are trimmed, tighten the nuts evenly and re-check them after the first few drives.
- Inspect old pins for bending, flat spots or elongated holes
- Replace worn perch seats along with the pins if they show wear
- Re-check nut torque after the first few trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1482 |
| UPC | 614901438451 |
| Pin diameter | 5/16 inch |
| Application | Leaf spring |
| Quantity | Pair, with nuts |
| Pin length | Longer than needed, to be cut to fit |
Vehicle fitment
Choose the pin diameter to suit your spring setup rather than selecting by model year. Check fit against your vehicle’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the pins are longer than needed, cut them down to length after installation. Confirm that the diameter fits your spring and perch holes before cutting.
What’s included
A pair of center pins with nuts.






