Overview
The Rubicon Express RE7133 is a 2.5-inch spacer lift kit for the Jeep Wrangler JK, sold with no shocks. It uses a 2.5-inch coil spacer in front and a smaller spacer in the rear to level the factory rake. It is built for the 2007–2018 Wrangler JK.
Beyond the spacers, the kit adds bump stops, extended sway bar links, brake line extensions and a new rear track bar bracket. The kit lifts the JK enough to run 35×12.50 tires. Shocks are not included. Precision valved shocks are offered in several levels, along with shock extensions that let the factory shocks stay in use.
Key features
- 2.5-inch lift from front coil spring spacers
- Smaller rear coil spring spacer to level the stance
- Bump stops included
- Extended sway bar links included
- Brake line extensions included
- New rear track bar bracket
- Shock extensions available so the factory shocks can be reused
Choosing shocks for a spacer lift
A spacer lift raises the body without changing suspension geometry, so the factory shocks are working at a different length and angle than they were designed for. Shock choice matters because the kit ships without them, and the ride, handling and travel depend on which shock or shock extension you fit.
Many owners pair a spacer kit with new shocks at the same time, since the old units may be worn after years of use. Shock extensions keep the factory shocks in service, while a full replacement gives more consistent control. Plan the shock purchase before the install so the vehicle is not left with an unmatched setup.
- Inspect factory shocks for leaks before deciding to reuse them
- Match shock length to the raised ride height
- Recheck driveline angles after the lift
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7133 |
| UPC | 614901085648 |
| Lift height | 2.5 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Smaller coil spring spacer |
| Maximum tire size | 35×12.50 |
| Shocks included | No |
| Kit type | Economy spacer kit |
| Fitment type | Direct fit |
Vehicle fitment
The kit is built for the 2007–2018 Jeep Wrangler JK. The years cover the full JK generation.
It is not for the JL Wrangler (2018 to 2022) or the Gladiator (JT), which use different chassis codes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit raises the body and adds extended sway bar links and brake line extensions, have the alignment checked afterward and inspect the driveline angles. The kit has no shocks, so choose the shock option before installation.
What’s included
Front coil spring spacers, a smaller rear coil spring spacer, bump stops, extended sway bar links, brake line extensions and a new rear track bar bracket.
Not included: shocks. Rubicon Express precision valved shocks and shock extensions are offered as options.


