Overview
The Rubicon Express RE9980 is a rear track bar mount for a custom axle in a Jeep Wrangler TJ, covering the 1997 to 2006 Wrangler (TJ). Rubicon Express says these brackets are required for cleanly mounting a custom axle in a TJ, so the mount gives the track bar a defined location on the axle.
The brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed, which Rubicon Express says gives them precision and strength. The mount is supplied in bare steel and must be welded in place, so it suits a build where welding is part of the installation.
Key features
- Laser cut from 3/16 inch cold rolled steel
- Laser cut and CNC formed for a precise fit
- Bare steel finish
- Welding required for installation
- Made for a custom rear axle in a TJ
Welding and axle setup
A track bar mount sets where the track bar attaches to the axle, so its position controls how the axle stays centered under the body. On a custom axle, the mount has to be located carefully before any welding starts. Clamp it in place, check the square and the distance to the frame mount, and confirm the track bar will reach both ends without binding through full suspension travel.
Welding steel brackets onto an axle changes the local heat and stress in the tube. Clean the mating surfaces to bare metal, use a welding process suited to the thickness, and let the joint cool without quenching. After the build, check the welds for cracks during the first trail sessions, and inspect the track bar bushings and ends at the same time.
- Dry-fit the mount before welding
- Clean mating surfaces to bare metal
- Inspect welds after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9980 |
| UPC | 614901442458 |
| Position | Rear |
| Material | 3/16 inch cold rolled steel |
| Finish | Bare steel |
| Installation | Welding required |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for a custom rear axle in the 1997 to 2006 Jeep Wrangler TJ. Other Wrangler generations, including the YJ and JK, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Other Wrangler generations, including the YJ and JK, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so plan for the mount to be welded in place as part of the axle build.
What’s included
The rear track bar mount.
Not included: the track bar and the custom axle the mount is welded to.
