Overview
The Rubicon Express RE9970 is a driver side rear lower control arm bracket for mounting a custom axle in a Jeep Wrangler TJ, which covers the 1997-2006 model years. It is supplied as bare steel and has to be welded into place.
The bracket is laser cut from 3/16-inch cold rolled steel and CNC formed for a precise fit. It is a control arm mount that accepts any tube diameter.
Key features
- Driver side rear lower position
- Laser cut 3/16-inch cold rolled steel
- CNC formed for precise bends
- Bare steel, welding required
- Works with any tube diameter
Welding a custom axle bracket
A weld-on bracket is only as good as the weld and the position it is set in. Because the bracket arrives as bare steel, the arm angle has to be set with the axle in place and the vehicle at its normal ride height. Tacking the bracket first lets you check alignment before the full weld goes down.
Clean the mounting surfaces to bare metal, and make sure the frame or axle section is sound before welding to it. Use a weld process and filler suited to the steel thickness, and let the joint cool gradually. After the bracket is fitted, check the arm for clearance through its full travel, since a bracket set too far forward or back will bind the arm.
- Set arm angle with the axle at ride height
- Tack weld and confirm alignment before full welding
- Clean all mating surfaces to bare metal
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9970 |
| UPC | 614901442359 |
| Material | 3/16-inch cold rolled steel |
| Finish | Bare steel |
| Position | Driver side, rear lower |
| Mount type | Control arm mount |
| Tube diameter | Any |
| Installation | Welding required |
Vehicle fitment
The bracket is for a custom axle in a TJ Wrangler, covering the 1997-2006 model years.
Confirm your vehicle’s year, model and trim before ordering, since the bracket is for the rear lower position on a TJ.
Installation notes
Because the bracket is bare steel, it must be welded to the frame or axle structure. Check the arm angle with the axle in place before welding.
What’s included
One driver side rear lower control arm bracket.
Not included: the control arm, the axle and the hardware that connects the arm.



