Select your vehicle
-13%

Rubicon Express Control Arm Mounts – RE9955

Rubicon Express

Shop Rubicon Express Control Arm Mounts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Passenger side upper control arm mounts
  • Laser cut and CNC formed from 3/16-inch cold rolled steel
  • Sold as a single mount

Description

Overview

The Rubicon Express control arm mounts for the passenger side upper position are brackets cut from 3/16-inch cold rolled steel. Rubicon Express says they are laser cut and CNC formed for precision and strength.

Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • Passenger side upper position
  • Laser cut 3/16-inch cold rolled steel
  • CNC formed for precise fit

Matching a mount to your build

A control arm mount holds the arm at its frame or axle point, so its position matters as much as its strength. Before buying, look at where the arm attaches on your vehicle and whether the mount sits at the upper or lower point. A bracket for the passenger side upper location has to line up with the existing holes and the arm length.

Steel brackets are common where clearance is limited and loads are steady, but they still need inspection. After installing, check that the mount sits square, the bolts are torqued and the arm moves freely through travel. Look for cracks around bends and elongated holes during routine service, and replace any bracket that shows wear.

  • Confirm the arm attaches at the upper point
  • Check the bracket sits square before torquing
  • Inspect bends and holes at each service

Specifications

Brand Rubicon Express
Part number RE9955
UPC 614901219395
Material 3/16-inch cold rolled steel
Position Passenger side, upper

Vehicle fitment

Confirm fit for your Jeep’s model and year before ordering.

Measure the frame and arm mounting points on your vehicle and compare them with the bracket before buying. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One passenger side upper control arm mount.

SKU: R/ERE9955 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 6.00 × 4.00 × 4.00 in
brands

Questions & Answers

Which Jeep does this mount fit?

Confirm fit for your vehicle's year, model and trim before ordering. The bracket is sold for the passenger side upper position, so match it to your frame and arm mounting points.

Is it for the upper or lower position?

It is a passenger side upper control arm mount. The lower position is a different part, so match the position on your build before ordering.

What is it made from?

It is laser cut from 3/16-inch cold rolled steel and CNC formed, which gives a precise fit and strength for the bracket.

Do upper mounts need to match a lift?

Often yes. A lift changes arm angles and mounting points, so an upper mount that suits a stock height may not suit a lifted setup. Recheck arm angle and clearance after any change in height.

What should be checked after a mount is replaced?

Check that the mount is square to the frame, that all fasteners are tight and that the arm moves through full travel without binding. Recheck alignment after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rubicon Express Control Arm Mounts on Amazon