Overview
The Rubicon Express RE1156 is a pair of rear sway bar end links for a 5.5 inch lift and above. It is for the rear of the 1997-2006 Jeep Wrangler TJ. Once the suspension is lifted, the links keep the sway bar in its proper location, which helps the vehicle handle predictably as the geometry changes.
The links are non-adjustable and use the non-disconnect style. They are sold as a pair, so one package covers both rear sides of the sway bar. They replace the stock sway bar end link directly, and they are meant for a 5.5 inch lift or more.
Key features
- Rear sway bar end links
- For a 5.5 inch lift and above
- Sold as a pair
- Non-disconnect style
- Non-adjustable length
- Direct replacement for the stock sway bar end link
Before you install
Sway bar end links connect the sway bar to the suspension and carry its twisting force as the axle moves. When a lift raises the body, the link angle gets steeper and the bar travels in a different arc. That change is why end links are commonly replaced with a lift, since the stock length no longer holds the bar where the design intends.
Worn end links often show play at the ball joints, a clunk over bumps, or a rattle when the axle cycles on the trail. Inspect the joints for looseness and check that the boots and threads are in good shape. Replace a loose link rather than tightening it, and recheck the fasteners after the first few drives.
- Check ball joint play by hand with the vehicle safely supported
- Look for torn boots or bent threads
- Recheck fastener tightness after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1156 |
| UPC | 614901437348 |
| Position | Rear |
| Lift | 5.5 inch and above |
| Sold as | Pair |
| Style | Non-disconnect, non-adjustable |
Vehicle fitment
These links are for the 1997-2006 Jeep Wrangler (TJ). They do not apply to other Wrangler generations.
Confirm your vehicle’s year, model and trim before ordering, and confirm the lift height is 5.5 inches or more.
Installation notes
At a 5.5 inch lift the sway bar angle changes considerably, so check the bar’s position and the link angles after the install. Confirm the links clear the frame and the rear axle at full suspension travel.
What’s included
The package contains one pair of rear sway bar end links in the non-disconnect style.



