Overview
The Rubicon Express RE9972 is a passenger side rear lower control arm bracket for a custom axle in a Jeep Wrangler TJ, which covers the 1997-2006 model years. It is supplied as bare steel and must be welded to the vehicle.
The bracket is cut from 3/16-inch cold rolled steel and CNC formed. It works as a control arm mount with any tube diameter.
Key features
- Passenger side rear lower position
- Laser cut 3/16-inch cold rolled steel
- CNC formed for precision
- Bare steel, welding required
Welding a custom axle bracket
A bare steel bracket must be welded, so prepare the mounting area by removing paint, rust and mill scale down to bare metal. Clean metal gives a stronger weld and keeps the bracket from cracking as the axle moves. Tack weld the bracket in position first, then check that the arm sits square before finishing the welds.
Once welded, protect the bracket from road spray with primer and paint, especially the seam where the weld meets the steel. Rear lower brackets on a TJ see constant flex, so inspect the welds after rough trail use and after any bumper or axle work.
- Grind to bare metal at the weld zone
- Tack the bracket and recheck arm position
- Prime and paint the finished welds
- Inspect welds after rough trail use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9972 |
| UPC | 614901442373 |
| Material | 3/16-inch cold rolled steel |
| Finish | Bare steel |
| Position | Passenger side, rear lower |
| Mount type | Control arm mount |
| Tube diameter | Any |
Vehicle fitment
It fits a custom axle in a Jeep Wrangler TJ, covering the 1997-2006 model years.
Check fit for your year, model and trim before buying, especially for JK or LJ Wranglers or the driver side.
Installation notes
Weld the bracket in place with the arm set to the correct position, since it does not bolt on.
What’s included
One passenger side rear lower control arm bracket.



