Overview
The Rubicon Express RE9993 is a driver side front lower control arm bracket for mounting a custom axle in a Jeep Wrangler TJ. It is supplied as bare steel and requires welding during installation.
The bracket is laser cut from 3/16-inch cold rolled steel and CNC formed for precise bends. It works with any tube diameter and is the mount for a clean custom axle installation on a TJ.
Key features
- Driver side front lower position
- Laser cut 3/16-inch cold rolled steel
- CNC formed for precise fit
- Bare steel, ready for welding
- Control arm mount that works with any tube diameter
Welding a custom axle mount
Weld-on brackets depend on clean joints and correct fit-up. Bare steel needs its mill scale and coatings removed at the weld area, and the bracket should be tacked and checked against the axle and frame before final welding. Heat from welding can move thin steel, so fit and square should be confirmed after each pass.
After welding, inspect the joints for cracks and undercut. Because bare steel corrodes quickly, the bracket and welds should be protected with a coating suited to trail conditions. Recheck the lower arm angle once the mounts are finished and the axle is in place.
- Clean the weld area to bare metal
- Tack and check fit before final welds
- Inspect welds for cracks and undercut
- Coat the finished bracket against corrosion
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9993 |
| UPC | 614901442540 |
| Material | 3/16-inch cold rolled steel |
| Position | Driver side, front lower |
| Tube diameter | Any |
| Quantity | Single |
| Installation | Welding required |
Vehicle fitment
It is for a custom axle on the Jeep Wrangler TJ, 1997 to 2006 models.
It is not for the front upper position or other Wrangler generations. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bracket must be welded in place, so fit it and check the lower arm angle before final welding.
What’s included
One driver side front lower control arm bracket in bare steel.
Not included: the control arm, the axle and the connecting hardware.



