Overview
The Rubicon Express RE2510 is a steering stabilizer relocation bracket that moves the factory steering stabilizer higher, which reduces the risk of damage to it. It is supplied as brackets only and is a mount-only design for a single stabilizer.
The bracket is a direct fit for 2 and 4-door models. Verify your year, model and trim before buying. The shock boot is not included.
Key features
- Relocates the factory stabilizer higher
- Brackets only
- Mount-only design
- Single stabilizer
- 2 and 4-door models listed
Relocation and clearance
Moving a steering stabilizer higher changes its angle and how it sits relative to the frame and steering components. A higher position can reduce the chance of the stabilizer being struck on rocks, but it also changes the range the stabilizer travels through. Check its full range of motion before the truck goes back on the trail.
Relocation is usually paired with an axle and steering setup that already fits the factory stabilizer’s layout. Check tie rod and drag link clearance, and confirm the stabilizer does not contact the frame at full turns. Recheck clearance after the first few trail runs, since suspension movement can shift the position slightly.
- Check clearance to the frame at full lock
- Confirm the stabilizer’s range of motion
- Look for wear on the stabilizer’s mounting bushings
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901440249 |
| Type | Mount only |
| Configuration | Single |
| Brackets | Included |
| Shock boot | Not included |
| Body style | 2 and 4-door |
Vehicle fitment
Confirm the year, model and trim before ordering, since the bracket moves the stabilizer location and must match the axle.
The bracket moves the stabilizer location, so the axle and the stabilizer must match the bracket. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Relocating the stabilizer changes its angle, so check the stabilizer’s range of motion and clearance to the frame through full suspension travel after the install. Confirm the brackets clear the steering components at full lock.
What’s included
Brackets only, for a single stabilizer. The factory stabilizer is not part of the kit. Not included: the shock boot and the stabilizer itself, which is the factory unit being moved.







