Overview
The RE9956 is a pair of lower control arm mounts cut from 3/16-inch cold rolled steel. They are laser cut and CNC formed, and they are designed as a direct fit mount.
Confirm the Jeep model and year that match your vehicle before ordering.
Key features
- Lower position, sold as a pair
- Laser cut 3/16-inch cold rolled steel
- CNC formed for precise fit
Choosing a mount for your build
Lower control arm mounts set where the arm attaches to the frame and axle, so they decide how the suspension geometry works. Because they are cut from steel, the thickness and shape matter for the loads the arm carries. Think about how the mounts will be used, on road or off road, and how often the vehicle will be driven hard.
Check the mounting points before buying, since a bracket that looks similar may sit in a different place on the axle or frame. Worn or cracked brackets should be replaced rather than repaired, and bushings at the arm ends should be inspected at the same time. Replace mounts together with their hardware so the loads are shared evenly.
- Compare the bracket shape with the frame and axle
- Inspect the bushings when the mounts are replaced
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9956 |
| UPC | 614901219401 |
| Material | 3/16-inch cold rolled steel |
| Position | Lower |
| Quantity | Pair |
Vehicle fitment
Check the mounting points against your vehicle’s frame and axle before buying.
Confirm the frame and axle mounting points match the bracket. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of lower control arm mounts.






