Overview
The Rubicon Express QA1CFR8 is a female heim joint with a 1/2 inch bore and right hand thread, used to build custom steering and suspension links. It has a precision ground, heat treated and hard chrome plated ball, surrounded by a Teflon and Kevlar self-lubricating race and set in a low carbon steel body.
The body is zinc plated for corrosion resistance. The joint is universal fit, so it is not tied to a vehicle model. Its bore and thread must match the rod end or link you are building.
Key features
- Precision ground, heat treated and hard chrome plated ball
- Teflon and Kevlar self-lubricating race
- Low carbon steel body with zinc plating
- Female joint with 1/2 inch bore
- Right hand thread
Choosing heim joints for custom links
A heim joint lets a link pivot in several directions while keeping its length adjustable. The ball and race carry the load, and their fit decides how smoothly the joint moves and how much play it develops. Before building a link, decide the angle the joint must reach and whether the link will see side loads, since that affects how much movement the joint needs to handle.
Correct thread engagement is important. The shank should thread far enough into the link to carry load safely, and the jam nut must lock it at the right length. Inspect boots, seals and the race for wear after rough use, and replace a joint that shows notable play, binding or cracking. Keep the threads clean and lightly coated before assembly.
- Confirm the bore matches the rod end
- Check thread engagement before tightening
- Use a jam nut to lock the joint length
- Inspect for play or binding after rough use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | QA1CFR8 |
| UPC | 614901437034 |
| Joint type | Female heim joint |
| Bore | 1/2 inch |
| Shank | 1/2 inch, -20 thread |
| Thread direction | Right hand |
| Ball | Hard chrome plated |
| Race | Teflon and Kevlar, self-lubricating |
| Body | Low carbon steel, zinc plated |
| Sold as | Individually |
Vehicle fitment
It is universal fit, so it is not tied to a particular year, model or vehicle. Check the 1/2 inch bore and the 1/2 inch, -20 right hand thread against the rod end or link before ordering.
Installation notes
A jam nut is used to lock the joint in place. It is not included, so buy one with the joint.
What’s included
One female heim joint, sold individually.
Not included: the jam nut.







